$145.00
**Please Note: The SS500 is discontinued and will be substituted by the EB-9V
McPherson Controls Automatic Flashing Unit for brush Type Generators
The Safe and Easy Way to Automatically Flash any Stubborn Old Generators
The SS500 Automatic Flashing Module is a true electronic flashing circuit with a larching timeout circuit that can be set from 1 to 8 seons timer. This unit will not flash again as the generator is trun off.
When tue residual voltage is too low for the voltage regulator to build voltage normally on the generator the SS500 is what you need. The SS500 uses battery voltage and the output of the generator to automatically flash the generator for 1 to 8 seconds and then stop.
| Input Voltage | DC 10~30 VDC |
|---|---|
| Sensing Voltage | AC 120/240 VAC |
| Flash Time | 1~8 sec. (Adjustable) |
| Trigger Contact | Oil pressure or fuel sensor |
| Resistance | 0, 5, 10, 15 Ohm select by jumper |
| Protection | Reverse current protection |
| Dimensions | 101.0 (L) x 69.0 (W) x 44.5 (H) mm |
| Weight | 5 lbs |
|---|
