MTS SS16A2 Voltage Regulator For Sale
McPherson Controls MTS SS16A2 Voltage Regulator Replacement for Marelli Caterpillar Khenkikian and Genaust AVRs
Upgrade your power system with the MTS SS16A2 voltage regulator for sale from McPherson Controls! Don’t miss out. Ensure stable voltage output and protect your equipment from fluctuations with this high-quality MTS SS16A2 voltage regulator for sale!
| Model NO. | SS16A2 | -400Hz |
|---|---|---|
| Sensing Input | Voltage 170~510 VAC Single Phase 2 wires | Voltage 170~510 VAC single phase 2 wire |
| Frequency 50/60 Hz DIP Switch Selectable | Frequency 400 Hz | |
| Power Input | Voltage 60~300 VAC single phase 2 wire Shunt or Auxiliary Winding | Voltage 60~300 VAC single phase 2 wire
Max. 90 VDC @ 240 VAC input |
| Output | Voltage Max. 90 VDC @ 240 VAC input
Current Continuous 16A, Max. Intermittent 20A for 10 sec. Resistance Min. 4 Ohm |
Voltage Max. 90 VDC @ 240 VAC input
Current Continuous 16A, Max. Intermittent 20A for 10 sec. Resistance Min. 6 Ohm @ 35 VDC |
| Voltage Regulation | < ±0.5% (with 4% engine governing) | < ±0.5% (with 4% engine governing) |
| Voltage Build-up | Residual voltage at AVR terminal > 5 VAC | Residual volts at AVR terminal > 5 VAC |
| Remote Voltage Adjustment | ±5% with 2K Ohm 1 watt trimmer | ±5% with 2 K Ohm 1 watt trimmer |
| Unit Power Dissipation | Max. 10 watt | Max. 10 watt |
| Thermal Drift | 0.03% per °C change in AVR ambient | 0.03% per °C change in AVR ambient |
| Under Frequency Protection | 55 Hz @ 60 Hz / 45 Hz @ 55 Hz (Adjustable) | 360 Hz (Adjustable) |
| Load Current “CT” Compensation | 1A or 5A (Selectable), 7% @ PF0.5, DIP Switch Selectable | 1A or 5A (Selectable) |
| Analogue Voltage Input A1 & A2 |  ±3 VDC Max 10% | ±5 VDC ±10% AC @ ±3 VDC |
| Environment | Operating Temperature : -40~70 °C
Storage Temperature : -40~85 °C Relative Humidity : Maximum 95% Vibration : 3.3G @ 100~2 KHz |
Operating Temperature : -40~70 °C
Storage Temperature : -40~85 °C Relative Humidity : Maximum 95% Vibration : 3.3G @ 100~2 KHz |
| AVR Controls Functions | VOLT : Voltage Adjustment
STAB : Stability Adjustment U/F*: To Set the U/F Knee Point DROOP : To Adjust Droop TRIM : Analogue Input Adjustment (*U/F: Under Frequency Protection) |
VOLT : Voltage Adjustment
STAB : Stability Adjustment U/F*: To Set the U/F Knee Point DROOP : To Adjust Droop TRIM : Analogue Input Adjustment (*U/F: Under Frequency Protection) |
| Dimensions | 156.0 (L) x 106.0 (W) x 43.0 (H) mm | 156.0 (L) x 106.0 (W) x 43.0 (H) mm |
| Weight | 450 g ±2% | 450 g ±2% |
