$199.98
The DSE2541Â Remote Battery Charger Display Module has been designed to work with all intelligent and enclosed battery chargers. The module displays information to the operator on charge output, charge cycle, mains (utility) supply status and indicates when fault conditions are present.
The DSE2541Â enables the user to control a battery charger remotely via the front panel buttons. The DSE2541Â and its connected charger can be configured using the front panel buttons.
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT
80 mA at 12 V, 75 mA at 24 V
MAXIMUM STANDBY CURRENT
65 mA at 12 V, 60 mA at 24 V
3 A at 30 V DC volt-free relay
| Weight | 5 lbs |
|---|
