Deep Sea Electronics DSE701 MKII Auto Start Control Module
The DSE701 MKII is a compact control module that offers a range of features for single-set applications.
OVERALL SIZE
72 mm x 72 mm x 38 mm (2.8” x 2.8” x 1.5”)
Excludes Key Switch
PANEL CUTOUT SIZE
68 mm x 68 mm (2.7 ” x 2.7″)
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
WEIGHT
0.14kg
KEY Features and Benefits
- Front panel key switch.
- Ensures the generator can only be operated when the key is used.
- Configurable for use as a manual or auto start control module.
- Helps to reduce module variants held in stock.
- Auxiliary shutdown input (manual mode only).
- Provides a simple input for a remote stop switch.
- LED status indication.
- Provides instant generator operating status.
- Engine pre-heat.
- Warms the engine to a safe temperature at start-up to increase engine life.
- Engine monitoring & protection.
- Protects engine from long-term damage.
- Over speed protection.
- Prevents engines running too fast and becoming damaged.
- DSE Configuration Suite Lite PC Software (DSE813 required).
- Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
- Monitors battery charging status using the WL terminal on the charge alternator.
- When the battery has a charging fault the module illuminates an LED on its front panel.
SPECIFICATION
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without internal batteries.
MAXIMUN OPERATING CURRENT
26 mA at 12 V, 27 mA at 24 V
MAXIMUM STANDBY CURRENT
20 mA at 12 V, 21 mA at 24 V
CHARGE/FAIL EXITATION RANGE
0 V TO 35 V
OUTPUTS
START
Solid state 1.2 A negative grounding terminal
RUN
Solid state 1.2 A negative grounding terminal
PRE-HEAT
Solid state 1.2 A negative grounding terminal
GENERATOR
VOLTAGE RANGE
15 V – 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
