Deep Sea Electronics DSEL401 MKII Intelligent Lighting Tower Control Module
The DSEL401 MKII is an intelligent control module designed specifically for mobile lighting tower applications. The control module provides class leading flexible features that are fully configurable to suit multiple complex lighting sequences.
OVERALL SIZE
140 mm x 113 mm x 43 mm (5.5” x 4.4” x 1.7”)
PANEL CUTOUT SIZE
118 mm x 92 mm (4.6” x 3.6”)
MAXIMUM PANEL THICKNESS
8.0mm (0.3”)
WEIGHT
0.28kg
Key Features and Benefits:
- Large back-lit icon LCD display.
- Displays information to the operator in a clear and concise format.
- Configurable outputs (8 DC, 3 analogue/digital).
- Provides multiple installation options.
- Configurable staged light control outputs.
- Prevents engine from stalling.
- Heated display option.
- Ensures the display continues to operate in extreme cold weather conditions.
- Power monitoring (kW h, kV Ar, kV Ah, kV Ar h).
- Provides clear accurate power measurement information.
- Automatic & manual light control.
- Allows lights to be controlled manually or turn on automatically when daylight reduces (sensor required).
- Individual lighting control.
- Avoids permanent light failure during restart.
- Light failure detection.
- Informs the operator of the exact bulbs that need replacing.
- Comprehensive fuel monitoring.
- When fuel reaches a certain level the lights can be dimmed to increase available running hours.
- Event scheduler (8).
- Can be programmed to operate up to 4 staged load outputs.
- Engine speed protection, engine hours counter, engine pre-heat, engine run-time scheduler, engine idle control for start/stop.
- Ensures the engine is fully monitored for improved operating performance.
- Start on low battery.
- Ensures the battery does not fully discharge. Engine runs until battery is charged.
- Configurable event log (50).
- Provides access to historical alarms and operational status.
- DSE Configuration Suite PC Software.
- Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT
85 mA at 12 V, 96 mA at 24 V
MAXIMUM STANDBY CURRENT
51 mA at 12 V, 47 mA at 24 V
MAXIMUM SLEEP CURRENT
35 mA at 12 V, 32 mA at 24 V
MAXIMUM DEEP SLEEP CURRENT
<10 uA at 12 V, <10 uA at 24 V
OUTPUTS
OUTPUT A (FUEL)
10 A short term, 5 A continuous,
at supply voltage
OUTPUT B (START)
10 A short term, 5 A continuous,
at supply voltage
AUXILIARY OUTPUTS C to J
2 A DC at supply voltage
GENERATOR
VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)
FREQUENCY RANGE
3.5 Hz to 75 Hz
