DSE7420 Auto Mains Utility Failure Control Module For Sale
The DSE7420 is a sophisticated mono display auto mains (utility) control module packed with industry leading features to enhance single-set control. The module can be used across a wide range of diesel and gas gen-set applications.
OVERALL SIZE
240 mm x 181 mm x 42 mm (9.4” x 6.8” x 1.6”)
PANEL CUTOUT SIZE
220 mm x 160 mm (8.7″ x 6.3″)
MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)
WEIGHT
0.88kg
Key Features and Benefits:
- CAN and magnetic pick-up sensing.
- Makes the module ideal for standard and electronic engine applications.
- Configurable inputs/outputs (11/8).
- Provides multiple installation options.
- Fuel usage monitor and low level alarms.
- Tracks the amount of fuel being used and sounds an alarm if over/under fuel use is detected.
- Remote communications (RS232, RS485, Ethernet, Modbus, RTU/TCP).
- Provides secure and simple off site monitoring. All ports are continuously active.
- Configurable event log (250).
- Provides access to historical alarms and operational status.
- Integral PLC editor.
- Ensures additional applications are easily integrated into the system.
- Power monitoring (kW h, kVAr, kv Ah, kV Ar h), reverse power protection, kW overload protection.
- Provides clear accurate power measurement information.
- Load switching, load shedding & dummy load outputs.
- Allows load options and dummy load requirements to be independently controlled.
- Data logging (HDD/USB).
- Provides current and historical status information.
- DSE Configuration Suite PC Software.
- Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
- Tier 4 CAN engine support.
- Ensures the control module can be used with the latest in modern electronic engine technology.
SPECIFICATION
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries
MAXIMUM OPERATING CURRENT
260 mA at 12 V, 130 mA at 24 V
MAXIMUM STANDBY CURRENT
120 mA at 12 V, 65 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
OUTPUTS
OUTPUT A (FUEL)
15 A DC at supply voltage
OUTPUT B (START)
15 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250 V AC (Volt free)
AUXILIARY OUTPUTS E,F,G,H,I & J
2 A DC at supply voltage
GENERATOR
VOLTAGE RANGE
15 V to 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAINS (UTILITY)
VOLTAGE RANGE
15 V to 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICK UP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)
