DSE334 Auto Transfer Switch Control Module For Sale
The Deep Sea Electronics DSE334 Automatic Transfer Switch Controller is designed to monitor and control the transfer of a load between two AC power sources. Source 1 and Source 2 can be configured for mains (utility), generator, or a combination of the two, making the DSE334 suitable for a wide range of automatic transfer switch (ATS) applications.
The DSE334 continuously monitors the voltage and frequency of both power sources. If Source 1 fails or moves outside the configured operating limits, the controller can issue a start command to Source 2. Once the second source is available and operating within acceptable limits, the DSE334 controls the transfer device to move the load from Source 1 to Source 2.
When Source 1 returns and remains within the configured limits, the controller can transfer the load back and shut down Source 2. Configurable timers help prevent unnecessary transfers or generator starts caused by brief utility interruptions or temporary fluctuations.
DSE334 Features
- Automatic transfer between two AC power sources
- Supports mains-to-generator, generator-to-generator, and other source configurations
- Monitors source voltage and frequency
- 10 configurable digital inputs
- 5 configurable outputs
- Volt-free relay outputs
- Backlit 4-line LCD display
- Red and green LED status indicators
- Configurable transfer and operating timers
- 10-event log with real-time clock
- Automatic warning or shutdown for detected fault conditions
- Auto-start inhibit and load inhibit functions
- Manual restore to Source 1
- Optional current monitoring
- Configuration through DSE Configuration Suite PC Software
- Selected configuration available directly from the front panel
Electrical Specifications
The DSE334 operates from an 8–35 V DC continuous supply and supports AC source voltage sensing from 15–333 V AC line-to-neutral. Both mains and generator frequency sensing ranges from 3.5 Hz to 75 Hz.
The controller includes multiple volt-free relay outputs rated for transfer-switch and generator-control applications. An optional DSE160 Self-Seeking Power Supply can also be used in applications where a DC supply is not available.
Built for Industrial ATS Applications
Designed for dependable operation in demanding environments, the DSE334 has an operating temperature range of -30°C to +70°C (-22°F to +158°F). When correctly installed in a control panel with the optional sealing gasket, the front of the module provides IP65 protection.
The DSE334 measures approximately 8.5″ × 6.2″ × 1.6″ (215 × 158 × 42 mm) with a required panel cutout of approximately 7.2″ × 5.4″ (182 × 137 mm).
For replacement applications, we recommend confirming the existing controller model and system requirements before ordering to ensure compatibility.
*Message us for the DSE 334 data sheet to confirm any important specifications*
Order the DSE334 Automatic Transfer Switch Controller today or message us to confirm availability and compatibility.









