The Deep Sea Electronics DSE G4500 Generator Controller is a next-generation compact controller designed to replace the now obsolete DSE 4610 and DSE 4620 modules. Built for modern generator systems, the G4500 delivers enhanced monitoring, flexible configuration, and reliable control for a wide range of applications.

Engineered for both Remote Start (RS) and Automatic Mains Failure (AMF) operation, the G4500 provides full generator control and protection in a single module. It supports electronic engines via J1939 CAN as well as non-electronic engines using alternator sensing, making it compatible with diesel, gas, and petrol systems.

🔍 Key Features

• Direct replacement for DSE 4610 and 4620 controllers
• Remote Start and AMF functionality in one module
• High-resolution display with real-time system data
• Monitors voltage, current, frequency, power, fuel level, and engine parameters
• Supports J1939 CAN and non-electronic engines
• Flexible inputs and outputs for custom configurations
• Integrated event logging and diagnostic fault monitoring
• Programmable via DSE Configuration Suite software
• IP65-rated front panel for durability

⚙️ Advanced Monitoring & Control

The G4500 provides comprehensive system visibility with real-time data tracking for:

• Generator voltage and frequency
• Engine speed and oil pressure
• Coolant temperature and fuel levels
• Load current and power output

Its intelligent diagnostics system logs fault codes and system events, helping reduce downtime and simplify troubleshooting.

🔌 Flexible Integration

With multiple configurable inputs, outputs, and communication options, the G4500 adapts easily to a wide range of generator setups. The module also supports advanced emissions-related monitoring for modern engines and fault detection inputs for legacy systems.

🔄 Replacement for DSE 4610 & 4620 (Now Obsolete)

Looking for the DSE 4610 or DSE 4620? These models are now obsolete and no longer in production.

The DSE G4500 is the direct next-generation replacement, designed to take over both models with improved performance, expanded monitoring, and ongoing manufacturer support.

If your generator currently uses a 4610 or 4620 controller, upgrading to the G4500 ensures:

• Continued reliability with a supported controller
• Improved diagnostics and fault monitoring
• Compatibility with modern engine systems and communication protocols
• Long-term availability of parts and technical support

Instead of sourcing outdated or limited-stock modules, the G4500 provides a future-proof solution built on the latest platform from Deep Sea Electronics. Order yours today from Power Systems Plus or message us for more information on obsolete models.

The post DSE G4500 Generator Controller (Replaces DSE 4610 & 4620) appeared first on Power Systems Plus.

The DSEE050 eView® is a fully configurable color engine display for Tier 4 Final and Stage V engines, supporting J1939 and TSC1 speed control. Customize screens, branding, and event logic using DSE’s free software. Ideal for modern engine applications. Order today from Power Systems Plus!

Email us for availability!

The post DSE E050 CAN Engine Display appeared first on Power Systems Plus.

The DSE P100 is a mains decoupling relay designed for parallel power systems, featuring G99 type-tested protection with both fixed and configurable settings. It supports peak lopping, base load, and STOR applications, plus automatic reset to minimize manual intervention. Reliable and easy to install. Order yours today!

The post DSEP100 Mains Decoupling Relay appeared first on Power Systems Plus.

The post DSE DT16 Deutsch Connector C | 007-851 appeared first on Power Systems Plus.

007-850

DT16 Deutsch Connector A

007-850

DT16 Deutsch Connector A, 18-way complete with pins.

WEIGHT
0.1 kg/3.5 oz

DT16 Deutsch Connector A, 18-way complete with pins.

The post DSE DT16 Deutsch Connector A | 007-850 appeared first on Power Systems Plus.

The E400 Connector Harness Set is a purpose-built wiring solution for the DSE E400 engine display module. It includes pre-wired, color-coded DT16 connectors with 1.2-meter cables, allowing for a clean, professional install without the need for custom wiring. With IP67-rated connectors and a durable PUR plastic build, it’s designed to withstand harsh environments and reduce the risk of wiring faults over time. Whether you’re building a new system or upgrading an existing one, this harness saves time, ensures consistent connections, and keeps your installation secure and weather-resistant—making it a reliable choice for any critical engine monitoring setup.

Order your E400 connector harness set from Power Systems Plus in Hillsboro, Oregon!

The post DSE E400 Connector Harness Set appeared first on Power Systems Plus.

DSE 020-1053 4G Antenna For Sale

Optimize your DSE890 MKII controller’s connectivity with this high-performance Combined 4G LTE (Main & Diversity) / GPS Antenna. Engineered specifically for seamless integration, this antenna enables reliable GPS location tracking and robust 4G LTE internet access. The enhanced internet connection supports communication with the DSEWebNet® server and MQTT broker, giving you real-time monitoring and control capabilities.

Key Features:

• Dual 4G LTE antennas (Main & Diversity) for superior signal strength and network reliability

• Built-in GPS antenna for accurate location detection

• Compact design with a 60 mm diameter and 69 mm housing depth

• Lightweight at just 300 grams, easy to install and handle

• Compatible exclusively with the DSE890 MKII controller

Product Variant:

• Model 020-1053 – Combined 4G LTE (Main & Diversity) / GPS Antenna

Upgrade your generator control system with this essential antenna to ensure uninterrupted connectivity and precise GPS tracking, critical for remote management and diagnostics.

The post DSE Combined 4G LTE (Main & Diversity) / GPS Antenna appeared first on Power Systems Plus.

The DSE2170 RTD/Thermocouple Input & Analog Output Expansion Module is designed to extend the input/output capabilities of DSEG8600 and DSEM-Series platforms, delivering precise temperature sensing and analog output control for advanced generator applications.

This module provides 4 configurable RTD/thermocouple inputs—supporting J Type, K Type, L Type, Pt100, and Pt1000 sensors—and 4 analog outputs, selectable between 0–10V or 0–20mA ranges, offering exceptional flexibility for system customization and monitoring.

Built for seamless communication, the DSE2170 includes a DSENet® port for integration with the DSEG8600 and a CAN port for DSEM-Series connections. A status LED allows quick verification of power and data link activity.

Available now at Power Systems Plus, your Oregon-based expert for generator control solutions and Deep Sea Electronics parts.

Key Features

• 4 RTD/thermocouple inputs: J, K, L, Pt100, or Pt1000

• 4 analog outputs: configurable as 0–10V or 0–20mA

• DSENet® and CAN ports for seamless system integration

• Status LED for power and communication monitoring

• Compact and durable design: 120 x 75 x 31.5 mm (4.72” x 2.95” x 1.24”)

Order yours today from Power Systems Plus!

The post DSE 2170 Expansion Module | DSENet RTD/Thermocouple Input & Analogue Output appeared first on Power Systems Plus.

The DSE2160 Expansion Module adds 8 configurable inputs and 8 outputs to your DSEG8600 or DSEM-Series controller. It supports analog, digital, RPM, pulse, and frequency inputs, with flexible output options. Includes DSENet® and CAN ports for seamless integration, plus LED status light for quick diagnostics.

The DSE2160 DSENet® Input/Output Expansion Module is designed to seamlessly expand the control capabilities of your DSEG8600 or DSEM-Series controller. Ideal for standby, commercial, and industrial generator systems, this module delivers increased flexibility by adding 8 inputs—including 2 analog (configurable as digital) and 6 digital inputs. Input A offers advanced functionality as a frequency input, pulse counter, or RPM input.

The DSE2160 also provides 8 configurable digital outputs, each of which can act as a digital input, positive-switching DC output, or negative-switching DC output, allowing for highly customized integration.

Engineered for reliable communication, the module includes both a DSENet® port (for DSEG8600 systems) and a CAN port (for DSEM-Series controllers). A built-in status LED makes it easy to monitor connection and power status at a glance.

Available now from Power Systems Plus—your Oregon-based source for Deep Sea Electronics parts and generator control solutions.

Key Features

• Adds 2 analog inputs (configurable as digital)

• Includes 6 standard digital inputs

• 8 configurable inputs/outputs with flexible DC switching

• Status LED for clear visual diagnostics

• Compatible with DSENet® and CAN communication systems

Order yours today from Power Systems Plus!

The post DSE 2160 Expansion Module | Input/Output appeared first on Power Systems Plus.

24 Volt, 15 Amp

The post DSE BC2415i Intelligent Battery Charger | 24 Volt 15 Amp appeared first on Power Systems Plus.