120V Engine Block Heaters for Sale | Generator Heaters | Power Systems Plus https://powersystemsplusinc.com/voltage/120v/ Generator Service, Sales, Parts, & Installation- Since 1999 Thu, 07 May 2026 20:41:48 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://powersystemsplusinc.com/wp-content/uploads/2018/01/logofixed2-50x50.png 120V Engine Block Heaters for Sale | Generator Heaters | Power Systems Plus https://powersystemsplusinc.com/voltage/120v/ 32 32 Hotstart EE115110-000 Engine Heater 1.5kW 120V https://powersystemsplusinc.com/product/ee115110-000-engine-heater/?utm_source=rss&utm_medium=rss&utm_campaign=ee115110-000-engine-heater Wed, 27 Aug 2025 20:26:15 +0000 https://powersystemsplusinc.com/?post_type=product&p=15366 The Hotstart EE115110-000 hazardous location engine heater keeps diesel and gas engines warm for reliable cold weather starting and reduced engine wear.

  • 120V, 1.5kW, Single Phase
  • Built-In Thermostat (100°F ON / 120°F OFF)
  • Hazardous location approved
  • Durable cast aluminum construction
  • External thermosiphon mounting design
  • Ideal for standby generators and industrial engines

Contact Power Systems Plus for current availability and lead times. EE heaters and larger HOTSTART heaters are often built to order, with typical lead times around 2 weeks depending on manufacturer availability.

The post Hotstart EE115110-000 Engine Heater 1.5kW 120V appeared first on Power Systems Plus.

]]> The Hotstart EE115110-000 EE Series engine heater delivers reliable thermosiphon preheating for diesel and gas engines in hazardous industrial environments. Featuring 1.5kW heating power, 120V, and Single Phase operation, this heater is designed for dependable cold weather starting and reduced engine wear in standby generator and heavy-duty engine applications.

HOTSTART EE heaters are hazardous location approved systems available in both single and three phase configurations and are hard wired directly into the main electrical system. The EE Series shares the same pressure die-cast aluminum tank and thermostat design found in HOTSTART CB and CL heaters, while adding an all-metal mounting bracket and higher heat output capabilities up to 5 kW for demanding Class I Group D hazardous locations.

Using thermosiphon convection circulation, the EE Series mounts externally from the engine block and relies on the natural rising of heated coolant to circulate warmth throughout the engine. Because no additional pump is required, thermosiphon heaters provide a simple, reliable, and adaptable heating solution for a wide range of diesel and gas engines.

Preheating engines helps ensure fast starting, improved load acceptance, and reduced wear to critical engine components. Industries including data centers, hospitals, mining operations, fleet vehicles, excavation equipment, and standby power systems rely on consistent engine heating to reduce downtime and improve equipment reliability.

  • 1.5kW heating output
  • 120V operation
  • Single Phase configuration
  • Built-In Thermostat
  • Hazardous location approved
  • Thermosiphon coolant circulation
  • Pressure die-cast aluminum tank
  • All-metal mounting bracket
  • Ideal for industrial and standby generator applications

Contact Power Systems Plus for current lead times, availability, and product support.

The post Hotstart EE115110-000 Engine Heater 1.5kW 120V appeared first on Power Systems Plus.

]]> Hotstart CUC-151FP In-block Heater for Cummins C Series Engines | 120V 1500W https://powersystemsplusinc.com/product/hotstart-cuc-151fp-in-block-heater-for-cummins-c-series-engines-120v-1500w/?utm_source=rss&utm_medium=rss&utm_campaign=hotstart-cuc-151fp-in-block-heater-for-cummins-c-series-engines-120v-1500w Wed, 27 Aug 2025 18:01:15 +0000 https://powersystemsplusinc.com/?post_type=product&p=15359 CUC-151FP Push-in Heater

The Hotstart® CUC-151FP In-Block Heater keeps your Cummins C Series engine warm, reducing cold-start wear and ensuring reliable starts in any weather.

  • Reduces engine wear from cold starts by up to 50%

  • Warms coolant for smoother cranking and faster starts

  • Saves fuel and minimizes unnecessary idling

  • CSA-approved for safety and reliability

  • Fits directly into the water jacket, replacing the right-side core plug

Order your Hotstart® CUC-151FP In-Block Heater today from Power Systems Plus in Oregon for reliable starts!

The post Hotstart CUC-151FP In-block Heater for Cummins C Series Engines | 120V 1500W appeared first on Power Systems Plus.

]]> Hotstart CUC-151FP In-block Heater For Sale in Portland, Oregon

The Hotstart® CUC-151FP In-Block Heater for Cummins C Series engines mounts directly into the water jacket to reduce cold-start wear by up to 50%. It keeps your engine warm for smoother starts, lower fuel use, and reduced idling. CSA-approved and available from Power Systems Plus in Oregon. Order today!

 

This 120V Hotstart® CUC-151FP in-block heater mounts directly into the right-side core plug of Cummins C Series engines, warming coolant for faster starts and smoother operation in cold weather. CSA-approved for safety, it reduces engine wear by up to 50%, saves fuel, and minimizes idling. Perfect for stationary generators, trucks, and industrial equipment, it ensures your engine is ready whenever you need it. Easy push-in installation makes it a simple upgrade for reliable performance year-round.

The post Hotstart CUC-151FP In-block Heater for Cummins C Series Engines | 120V 1500W appeared first on Power Systems Plus.

]]> TPS051GT12-001 Engine Block Heater https://powersystemsplusinc.com/product/hotstart-tps051gt12-001-engine-block-heater-120v-500w/?utm_source=rss&utm_medium=rss&utm_campaign=hotstart-tps051gt12-001-engine-block-heater-120v-500w Fri, 08 Aug 2025 18:43:47 +0000 https://powersystemsplusinc.com/?post_type=product&p=15087 HTR 500W 120V 100-120F 1/2NPT YCORD

The post TPS051GT12-001 Engine Block Heater appeared first on Power Systems Plus.

]]> HTR 500W 120V 100-120F 1/2NPT YCORD

The post TPS051GT12-001 Engine Block Heater appeared first on Power Systems Plus.

]]> Hotstart FM15120 Flush Mount Kit | 120V | 15 Amps https://powersystemsplusinc.com/product/hotstart-fm15120-flush-mount-kit-120v-15-amps/?utm_source=rss&utm_medium=rss&utm_campaign=hotstart-fm15120-flush-mount-kit-120v-15-amps Thu, 10 Jul 2025 22:34:51 +0000 https://powersystemsplusinc.com/?post_type=product&p=14881 Hotstart FM15120 Flush Mount Kit

120 Volts, 15 Amps

500 to 1800 Wattage Range

The Hotstart FM15120 Flush Mount Kit provides a safe, weather-resistant connection point for powering engine heaters on generators, vehicles, or equipment.

  • Supports 120V, 15A power input

  • Compatible with heaters from 500 to 1800 watts

  • Ideal for standby generators and fleet vehicles

  • Protects wiring from damage and weather exposure

  • Clean, professional appearance with easy installation

Order your Hotstart FM15120 Flush Mount Kit today from Power Systems Plus in Oregon and keep your equipment ready when it matters most.

The post Hotstart FM15120 Flush Mount Kit | 120V | 15 Amps appeared first on Power Systems Plus.

]]> Hotstart FM15120 Flush Mount Kit For Sale

For Thermosiphon Engine Heaters

Wattage Range: 500 to 1800

The Hotstart FM15120 Flush Mount Kit provides a clean, secure connection for engine block heaters rated 500–1800 watts. Designed for 120V, 15A systems, it’s ideal for standby generator installations, vehicle fleets, or industrial engines. Prevent cord damage and ensure safe access. Order your flush mount kit from Power Systems Plus in Oregon.

Kits include: Recessed male receptacle with 6’ (1.8m) cord (no female connectors), hinged flip cover and female connector.

The post Hotstart FM15120 Flush Mount Kit | 120V | 15 Amps appeared first on Power Systems Plus.

]]> Hotstart CTM25110-A00 Engine Block Heater | 2.5 kW 120v Temp Range 100-120 F w/ 9.8′ Cord Without Plug https://powersystemsplusinc.com/product/hotstart-ctm-model-ctm25110-a00-engine-block-heater-2-5-kw-120v-temp-range-100-120/?utm_source=rss&utm_medium=rss&utm_campaign=hotstart-ctm-model-ctm25110-a00-engine-block-heater-2-5-kw-120v-temp-range-100-120 Mon, 03 Sep 2018 21:54:41 +0000 https://powersystemsplusinc.com/?post_type=product&p=5822 CTM25110-A00 Heater

The Hotstart CTM25110-A00 Engine Block Heater keeps engines warm and ready for reliable cold-weather starts.

  • High Wattage Output: 2.5kW at 120V for efficient heating of medium to large engines.

  • Built-in Thermostat: Maintains coolant temperatures between 100–120°F for optimal performance.

  • Durable Construction: Pressure die-cast aluminum tank ensures long-lasting reliability.

  • Weather-Resistant Design: Suitable for harsh industrial and outdoor environments.

  • Easy Installation: Flexible plumbing orientation and included mounting kit simplify setup.

Order your Hotstart CTM25110-A00 heater from Power Systems Plus in Oregon to protect your engine and ensure fast cold-weather starts. 7 Day Build Time plus Transit

The post Hotstart CTM25110-A00 Engine Block Heater | 2.5 kW 120v Temp Range 100-120 F w/ 9.8′ Cord Without Plug appeared first on Power Systems Plus.

]]> Hotstart CTM25110-A00 Engine Block Heater For Sale in Oregon

Email us for availability!

The Hotstart CTM25110-A00 Engine Block Heater delivers 2.5kW of reliable heat at 120V, keeping engines at optimal temperatures for cold-weather starts. Ideal for diesel and gas engines in trucks, tractors, or stationary equipment. Order your Hotstart CTM25110-A00 heater from Power Systems Plus in Oregon to protect your engine and ensure fast cold-weather starts.

 

BENEFITS & FEATURES

COMPACT CAPABILITY

Despite its small footprint, efficient forced circulation allows the CTM to heat engines up to 20 liters in displacement, allowing for a wide variety of small engine

applications.

VERSATILE & ADAPTABLE

The CTM can be configured for almost any weather protected application. Multiple options are available, including UL/C-US listed and CE-compliant models.

EASY INSTALLATION

The CTM’s inlet and outlet may be reoriented at 90° increments to accommodate heater plumbing. The included mounting kit is ideal for most installations; an optional vibration isolation kit is also available.

LOWER TOTAL COST OF OWNERSHIP

Forced circulation provides uniform heat throughout the engine, reducing component maintenance and offering significant energy savings. The CTM may reduce end-user utility costs by up to 35%.

 

 

The post Hotstart CTM25110-A00 Engine Block Heater | 2.5 kW 120v Temp Range 100-120 F w/ 9.8′ Cord Without Plug appeared first on Power Systems Plus.

]]> Hotstart CTM25110-N00 Engine Block Heater | 2.5 kW 120v Temp Range 100-120 F w/ 48″ Cord & NEMA Plug https://powersystemsplusinc.com/product/hotstart-ctm25110-n00-engine-block-heater/?utm_source=rss&utm_medium=rss&utm_campaign=hotstart-ctm25110-n00-engine-block-heater Mon, 03 Sep 2018 19:14:58 +0000 https://powersystemsplusinc.com/?post_type=product&p=5816 The Hotstart CTM25110-N00 Engine Block Heater ensures reliable and efficient cold-weather starts for your engine. Better performance, longer life.

  • High Wattage Output: Delivers 2500W at 120V, suitable for engines with 750–1200 CID (12–20L) displacement.

  • Built-in Thermostat: Maintains coolant temperatures between 100–120°F (38–49°C) for optimal engine performance.

  • Durable Construction: Features a pressure die-cast aluminum tank for long-lasting reliability.

  • Weather-Resistant Design: NEMA 4 rated, making it suitable for harsh environments.

  • Easy Installation: Includes a 48″ (1.2m) cord and NEMA plug for straightforward setup.

Order your Hotstart CTM25110-N00 heater from Power Systems Plus in Oregon for dependable cold-weather engine starts and peace of mind in any weather.

The post Hotstart CTM25110-N00 Engine Block Heater | 2.5 kW 120v Temp Range 100-120 F w/ 48″ Cord & NEMA Plug appeared first on Power Systems Plus.

]]> Hotstart CTM25110-N00 Engine Block Heater For Sale in Portland, OR

Hotstart CTM25110-N00 Engine Block Heater 2.5 kW 120v Temp Range 100-120 F w/ 48″ Cord & NEMA Plug

Looking for a Hotstart CTM Model CTM25110-N00 engine block heater to improve your generators performance?

Look no further.

Our Hotstart CTM25110-N00 Engine Block Heaters fit a variety of engines and is easy to install. Perfect for heating your engine in cold conditions so you don’t have to worry about having power.

Don’t miss out. Order your own CTM25110-N00 block heater today!

 

Despite its small footprint, efficient forced circulation allows the HOTflow® CTM system to heat engines up to 20 liters in displacement, allowing for a wide variety of weather-protected small engine applications. Multiple options are available, including UL/C-US listed and CE-compliant models.

The CTM’s inlet and outlet may be reoriented at 90° increments to accommodate heater plumbing. The included mounting kit is ideal for most installations; an optional vibration isolation kit is also available. Forced circulation provides uniform heat throughout the engine, reducing component maintenance and offering significant energy savings – resulting in end-user utility cost reductions up to 35%*.

*Savings are dependent on local utility rates and installation variables.

 

BENEFITS & FEATURES

  • COMPACT CAPABILITY
    • Efficient forced circulation heats engines up to 20 liters despite its small footprint.
    • Ideal for a wide variety of small engine applications.
  • VERSATILE & ADAPTABLE
    • Configurable for almost any weather-protected application.
    • Multiple options available, including UL/C-US listed and CE-compliant models.
  • EASY INSTALLATION
    • Inlet and outlet reorientation at 90° increments for flexible plumbing.
    • Includes mounting kit for most installations; optional vibration isolation kit available.
  • LOWER TOTAL COST OF OWNERSHIP
    • Uniform heat distribution reduces component maintenance.
    • Significant energy savings may reduce end-user utility costs by up to 35%.

 

Don’t miss out on the efficient heating and potential savings with the CTM25110-N00 engine block heater for sale! If this heater is not in-stock, it has a lead time of 7-10 days before shipping. Please message us before ordering if delivery time is important.

The post Hotstart CTM25110-N00 Engine Block Heater | 2.5 kW 120v Temp Range 100-120 F w/ 48″ Cord & NEMA Plug appeared first on Power Systems Plus.

]]> Hotstart® CTM15110-N00 Engine Block Heater | 1.5 kW 120V (100–120°F) In Stock https://powersystemsplusinc.com/product/hotstart-ctm-model-ctm15110-n00-engine-block-heater-1-5-kw-120v-temp-range-100-120-f/?utm_source=rss&utm_medium=rss&utm_campaign=hotstart-ctm-model-ctm15110-n00-engine-block-heater-1-5-kw-120v-temp-range-100-120-f Mon, 03 Sep 2018 18:49:32 +0000 https://powersystemsplusinc.com/?post_type=product&p=5814 Free Shipping

The Hotstart CTM15110-N00 Engine Heater keeps engines warm and ready for reliable cold-weather starts.

  • Efficient Heating: Delivers 1500W at 120V, ideal for engines up to 12 liters in displacement.

  • Built-in Thermostat: Maintains coolant temperatures between 100–120°F for optimal engine performance.

  • Durable Construction: Pressure die-cast aluminum tank ensures long-lasting reliability.

  • Weather-Resistant Design: Suitable for harsh industrial and outdoor environments.

  • Easy Installation: Flexible plumbing orientation and included mounting kit simplify setup.

Order your Hotstart CTM15110-N00 heater from Power Systems Plus in Oregon for reliable cold-weather engine starts. Message us today for availability and shipping estimate.

The post Hotstart® CTM15110-N00 Engine Block Heater | 1.5 kW 120V (100–120°F) In Stock appeared first on Power Systems Plus.

]]> Hotstart CTM15110-N00 Engine Block Heater For Sale in Portland, Oregon

Hotstart CTM Model CTM15110-N00 Engine Block Heater 1.5 kW 120v Temp Range 100-120 F w/ 48″ Cord & NEMA Plug

The CTM15110-N00 engine block heater is easy to install and rapidly heats your engine, ensuring a smooth start every time. It features an integrated pump to deliver uniform heating throughout the entire engine. Order a CTM15110-N00 engine block heater to keep your generator reliable in extreme weather.

 

CTM Model BENEFITS & FEATURES

COMPACT CAPABILITY

Despite its small footprint, efficient forced circulation allows the CTM to heat engines up to 20 liters in displacement, allowing for a wide variety of small engine

applications.

VERSATILE & ADAPTABLE

The CTM can be configured for almost any weather protected application. Multiple options are available, including UL/C-US listed and CE-compliant models.

EASY INSTALLATION

The CTM’s inlet and outlet may be reoriented at 90° increments to accommodate heater plumbing. The included mounting kit is ideal for most installations; an optional vibration isolation kit is also available.

LOWER TOTAL COST OF OWNERSHIP

Forced circulation provides uniform heat throughout the engine, reducing component maintenance and offering significant energy savings. The CTM may reduce end-user utility costs by up to 35%.

 

Message us for availability and shipping estimate. 

 

The post Hotstart® CTM15110-N00 Engine Block Heater | 1.5 kW 120V (100–120°F) In Stock appeared first on Power Systems Plus.

]]> 7-10 day lead time! Hotstart TFTC10-200 Thermostat Option 100-120 F 1″ NPT Female X 1″NPT Male https://powersystemsplusinc.com/product/hotstart-engine-block-heater-thermostat-tftc10-200-option-100-120-f/?utm_source=rss&utm_medium=rss&utm_campaign=hotstart-engine-block-heater-thermostat-tftc10-200-option-100-120-f Tue, 27 Sep 2016 19:26:52 +0000 https://powersystemsplusinc.com/product/hotstart-engine-block-heater-thermostat-tftc10-200-option-100-120-f/ TFTC10-200 - Hotstart Thermostat 100-120F
Manufacturer: Hotstart

Type: Temperature Control

Voltage: Up to 480 VAC

Amps: 120/240 V -25amps

Amps: 277 V -22amps

Amps: 480 V -22amps

Thermostat Range: 100 F – 120 F

Electrical Connection: Conduit

Mechanical Connection: 1" NPT Female X 1"NPT Male

 

 

The post 7-10 day lead time! Hotstart TFTC10-200 Thermostat Option 100-120 F 1″ NPT Female X 1″NPT Male appeared first on Power Systems Plus.

]]> Hotstart TFTC10-200 Thermostat For Sale

Hotstart TFTC10-200 Thermostat Option 100-120 F 1″ NPT Female X 1″NPT Male

 

A Hotstart thermostat regulates engine block heaters, activating them in cold weather for efficient starting and deactivating them to conserve energy once the engine reaches optimal temperature.

Get your generator engine ready for cold weather with a Hotstart TFTC10-200 thermostat today! Don’t let chilly temperatures slow you down. Optimize your engine’s performance and reliability with precise temperature control. Upgrade now with a Hotstart TFTC10-200 engine block heater thermostat and ensure smooth starts every time.

 

TFTC10-200 – Hotstart Thermostat 100-120F
Manufacturer: Hotstart

Type: Temperature Control

Voltage: Up to 480 VAC

Amps: 120/240 V -25amps

Amps: 277 V -22amps

Amps: 480 V -22amps

Thermostat Range: 100 F – 120 F

Electrical Connection: Conduit

Mechanical Connection: 1″ NPT Female X 1″NPT Male

The post 7-10 day lead time! Hotstart TFTC10-200 Thermostat Option 100-120 F 1″ NPT Female X 1″NPT Male appeared first on Power Systems Plus.

]]> 7-10 day lead time! Hotstart TFTC10-220 Thermostat 100-120 F 1″ NPT Male X 1″NPT Male https://powersystemsplusinc.com/product/hotstart-engine-block-heater-thermostat-tftc10-220-option-100-120-f/?utm_source=rss&utm_medium=rss&utm_campaign=hotstart-engine-block-heater-thermostat-tftc10-220-option-100-120-f Tue, 27 Sep 2016 17:38:51 +0000 https://powersystemsplusinc.com/product/hotstart-engine-block-heater-thermostat-tftc10-220-option-100-120-f/

TFTC10-220 - Hotstart Thermostat 100-120F

Manufacturer: Hotstart

Type: Temperature Control

Voltage: Up to 480 VAC

Amps: 120/240 V -25 AMPS

Amps: 277 V -22 AMPS

Amps: 480 V -22 AMPS

Thermostat Range: 100 F – 120 F

Electrical Connection: Conduit

Mechanical Connection: 1" NPT Male X 1"NPT Male

 

tftc10-220 Spec Sheet

 

The post 7-10 day lead time! Hotstart TFTC10-220 Thermostat 100-120 F 1″ NPT Male X 1″NPT Male appeared first on Power Systems Plus.

]]>

Hotstart TFTC10-220 Thermostat For Sale

Hotstart Engine Block Heater Thermostat TFTC10-220 – Option 100-120F
Manufacturer: Hotstart

Type: Temperature Control

Voltage: Up to 480 VAC

Amps: 120/240 V -25 AMPS

Amps: 277 V -22 AMPS

Amps: 480 V -22 AMPS

Thermostat Range: 100 F – 120 F

Electrical Connection: Conduit

Mechanical Connection: 1″ NPT Male X 1″NPT Male

The post 7-10 day lead time! Hotstart TFTC10-220 Thermostat 100-120 F 1″ NPT Male X 1″NPT Male appeared first on Power Systems Plus.

]]> Hotstart CL150812-200 Block Heater | 5000W 208V (120–140°F) https://powersystemsplusinc.com/product/hotstart-engine-block-heater-cl150812-200-type-5000-watt-208-volt-5000w-208v-option-120-140-f/?utm_source=rss&utm_medium=rss&utm_campaign=hotstart-engine-block-heater-cl150812-200-type-5000-watt-208-volt-5000w-208v-option-120-140-f Tue, 20 Sep 2016 21:15:31 +0000 https://powersystemsplusinc.com/product/hotstart-engine-block-heater-cl150812-200-type-5000-watt-208-volt-5000w-208v-option-120-140-f/ 5000W 208V Generator Block Heater | Free Shipping

Keep your generator ready for cold starts with the Hotstart CL150812-200 block heater. Built for commercial and industrial standby systems, this heater maintains consistent engine temperature for reliable startup in cold conditions.

  • 5000W heating power for fast, effective engine warm-up

  • 208V operation for stable, consistent performance

  • Maintains 120–140°F coolant temperature

  • Ideal for large standby generators and industrial equipment

  • Commonly used in 208V commercial generator applications

Lead times may vary due to manufacturer demand. Contact us to confirm availability or find alternatives.

The post Hotstart CL150812-200 Block Heater | 5000W 208V (120–140°F) appeared first on Power Systems Plus.

]]> Hotstart CL150812-200 Engine Block Heater For Sale in Portland, OR

Type 5000W 208V Option 120-140 F

The Hotstart CL150812-200 Engine Block Heater delivers 5000W at 208V, keeping engines warm between 120–140°F for reliable cold starts and optimal generator performance. Order your CL150812-200 engine heater from Power Systems Plus in Portland, Oregon today! Standard build time is 7-10 days for Hotstart CL heaters. If delivery time is important, message us before ordering to confirm availability.

The post Hotstart CL150812-200 Block Heater | 5000W 208V (120–140°F) appeared first on Power Systems Plus.

]]>