Frequency and voltage regulation – Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Advanced electrical features – Excellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiency.
Parallel-capacity capable – Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Hot-swappable batteries – Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Dual mains input – Increases availability by allowing the UPS to be connected to two separate power sources.
Generator compatible – Ensures clean, uninterrupted power to protected equipment when generator power is used.
Automatic internal bypass – Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Battery replacement without tools – Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
User-replaceable air filters – Enables quick and simple replacement of air filters.
7×24 telephone technical support.
Our experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.
Multiple levels of service – With the option of packages or individual service components, our services are structured to allow you to pick and choose what you would like APC to do for you.
Front-access servicing – Simplifies installation and UPS maintenance while minimizing space requirements.
Environmental monitoringPrevent equipment failure from a full range of threatening environmental conditions.
Built-in Web/SNMP management – Full-featured management via a Web browser as well as comprehensive management from a Network Management System.
Audible alarms – Provides notification of changing utility power and UPS power conditions.
LCD graphics display – Text and mimic diagrams that display modes of operation, system parameters and alarms.
Total Cost of Ownership
Temperature-compensated battery charging – Prolongs battery life by regulating the charge voltage according to battery temperature.
Excellent footprint – Small UPS footprint provides maximum usage of valuable electrical room floorspace
Input power factor correction – Minimizes installation costs by enabling the use of smaller generators and cabling.
Output power capacity 12.0 KWatts / 15.0 kVAMax Configurable Power (Watts) 12.0 KWatts / 15.0 kVA
Nominal Output Voltage 208V 3PH
Output Voltage Note Configurable for 200 : 208 or 220V 3 Phase nominal output voltage
Efficiency at Full Load 93.0 % Output Voltage Distortion Less than 3%Output Frequency (sync to mains) 57 – 63 Hz for 60 Hz nominal
Output Frequency (not synced) 60Hz +/- 0.1% for 60Hz nominal
Load Crest Factor Unlimited
Topology Double Conversion Online
Waveform type Sine wave
(1) Hard Wire 4-wire (3PH + G) (Battery Backup)
(1) Hard Wire 5-wire (3PH + N + G) (Battery Backup)
(1) Screw Terminals (Battery Backup)
Output Voltage THD < 2% linear load and <4% non-linear loadOutput Voltage Tolerance +/- 5% static and 100% load step – Bypass Built-in Maintenance Bypass, Built-in Static Bypass
Nominal Input Voltage 208V 3PH
Input frequency 40 – 70 Hz (auto sensing)Input Connections Hard Wire 5-wire (3PH + N + G)Input voltage range for main operations 160 – 240VEfficiency at Full Load 93.0 % Input Power Factor at Full Load 0.98
Batteries & Runtime
Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules 2Typical recharge time 5hour(s)Nominal Battery Voltage +/-192 V (split battery referenced to neutral)
Expected Battery Life (years) 3 – 5RBC Quantity 2
End of Discharge Battery Voltage +/-154 VRuntime
Communications & Management
Interface Port(s) DB-9 RS-232 , G35TPre-Installed SmartSlot™ CardsAP9631
Maximum Height 58.7inches ( 1491mm , 149.1cm ) Maximum Width 14.0inches ( 356mm , 35.6cm ) Maximum Depth 33.0inches ( 838mm , 83.8cm ) Net Weight 873.0lbs. ( 396.82kg ) Shipping weight 942.0lbs. ( 428.18kg ) Shipping Height 64.7inches ( 1643mm , 164.3cm ) Shipping Width 25.6inches ( 650mm , 65.0cm ) Shipping Depth 41.8inches ( 1062mm , 106.2cm )
Operating Environment 32 – 104 °F ( 0 – 40 °C ) Operating Relative Humidity 0 – 95 % Operating Elevation 0-3333ft ( 0-999.9meters ) Storage Temperature -15 – 45 °C Storage Relative Humidity 0 – 95 % Storage Elevation 0-50000ft ( 0-15000meters ) Audible noise at 1 meter from surface of unit 51.3dBAOnline thermal dissipation 2989.0BTU/hrProtection Class NEMA 12, IP 51
Approvals cUL Listed, CSA, CSA C22.2 No. 107.1, ISO 14001, ISO 9001, UL 1778