McPherson Controls Full Wave 150 Amp Static Analog Voltage Regulator is capable of working in Parallel. Works with A1+A2 Power Factor Correction. Multiple Sensing Voltages. Built In Flashing Unit. The Regulator is built inside a wall-mount enclosure with Cooling System and separate Power Input Sensing.

Works with Electric Motor Division (EMD), large Catepillar’s, and large DELL Generators

The post SS150FW Voltage Regulator | 150 Amp Static Analog EMD Caterpillar Dell appeared first on Power Systems Plus.

Analog / Digital AVR, Single-phase / Three-phase Voltage detection, 8 Amp, Voltage Regulator for use with Auxiliary Winding, Harmonic Winding, Harmonic + Auxiliary Winding, PMG, and self-excited (SHUNT) self- excited brushless-type generators.

The post ADVR-083 Analog / Digital Voltage Regulator Single & Three Phase Detection appeared first on Power Systems Plus.

The DSEA106 MKII Digital Automatic Voltage Regulator (AVR) takes the proven performance of the original DSEA106 and adds advanced features to enhance reliability and versatility. Designed to regulate the output voltage of AC alternators, it draws power from either a stator auxiliary winding or a shunt system, ensuring seamless operation.

Unlike traditional analogue designs, the DSEA106 MKII offers superior stability, providing smooth, consistent, and regulated AC voltage that remains unaffected by fluctuating electrical loads.

Order the DSEA106 MKII today and experience unmatched voltage stability for your generator. With quick shipping and reliable performance, take control of your power systems now!

Please Note: The DSE815 interface is required for programming.

SPECIFICATIONS

Power Supply

• Voltage Range: 100 V AC to 300 V AC (Phase to Neutral/Phase)

• Frequency Range: 40 Hz to 180 Hz

Alternator Output Sensing

• Voltage Range: 15 V AC to 600 V AC (Phase to Neutral/Phase)

• Frequency Range: 40 Hz to 65 Hz

Excitation Output

• Excitator Field Winding Impedance: 5 Ω to 50 Ω

• Continuous Voltage Rating: 0 V DC to 100 V DC

• Continuous Current Rating: 0 A DC to 7 A DC

• Maximum Current Rating: 15 A DC for 10 seconds

Quadrature Droop CT

• Maximum Secondary Current: 5 A AC

• Burden: 0.25 VA

• Accuracy: 1%

Remote Voltage Adjustment

• Potentiometer: 5 kΩ

• Voltage Input: -10 V DC to 10 V DC

The post DSEA106 MKII Digital Automatic Voltage Regulator appeared first on Power Systems Plus.

Frequency 50/60 Hz selectable Output  Max. 90 VDC @ 220 VAC input

Current Continuous 75A, Intermittent 100A for 10 sec.

Resistance Min. 1.5 Ohm Volt. Regulation < ±1% (with 4% engine governing) Voltage Build-up Residual volts at AVR terminal > 5 VAC (25 Hz) External Volts Adjustment ±20% Under Frequency Protection 60 Hz system presets knee point at 55 Hz

50 Hz system presets knee point at 45 Hz Operation Temperature -40~60 °C Dimensions 420.0 (L) x 150.0 (W) x 190.0 (H) mm

The post SS75HW Carbon Brush Type 75 Amp Halfwave Static Regulator appeared first on Power Systems Plus.

Frequency 50/60 Hz selectable Output  Max. 180 VDC @ 220 VAC input

Current Continuous 75A, Intermittent 100A for 10 sec.

Resistance Min. 1.5 Ohm Volt. Regulation < ±1% (with 4% engine governing) Voltage Build-up Residual volts at AVR terminal > 5 VAC (25 Hz) External Volts Adjustment ±20% Under Frequency Protection 60 Hz system presets knee point at 55 Hz

50 Hz system presets knee point at 45 Hz Operation Temperature -40~60 °C Dimensions 420.0 (L) x 150.0 (W) x 190.0 (H) mm

The post McPherson Controls MTS SS75FW Carbon Brush Type 75 Amp Fullwave Static Regulator appeared first on Power Systems Plus.

McPherson Controls MTS SS5K3 Automatic Voltage Regulator (Elemax, Honda, Kawasaki, Kubota, Low Boy, Suzuki, Sawafuji, Yamaha)

The McPherson Controls MTS SS5K3 Automatic Voltage Regulator is a versatile solution for maintaining stable voltage levels in power generation systems. Compatible with top generator brands like Elemax, Honda, Kawasaki, Kubota, and more, it ensures reliable electrical output for residential and industrial use, offering precise control and equipment protection. Order yours today from Power Systems Plus!

The post MTS SS5K3 Automatic Voltage Regulator For Sale Elemax Honda Kawasaki Kubota Low Boy Suzuki Sawafuji Yamaha appeared first on Power Systems Plus.

Frequency 50/60 Hz selectable Output Max. 90 VDC @ 220 VAC input

Current Continuous 45A, Intermittent 60A for 10 sec.

Resistance Min. 1.5 Ohm Volt. Regulation < ±1% (with 4% engine governing) Voltage Build-up Residual volts at AVR terminal > 5 VAC (25 Hz) External Volts Adjustment ±20% Under Frequency Protection 60 Hz system presets knee point at 55 Hz

50 Hz system presets knee point at 45 Hz Operation Temperature -40~60 °C Dimensions 330.0 (L) x 190.0 (W) x 180.0 (H) mm

The post SS50HW Carbon Brush Type Generator 50 Amp Halfwave Static Regulator appeared first on Power Systems Plus.

Terminal 0-220V = 170~260V

Terminal 0-380V = 340~520V

Frequency 50/60 Hz selectable Power Input Voltage 40~150 VAC 3 phase Output Current Max. 10A Current Droop Max. 4% @ P.F.=0.8 Voltage Regulation < ±0.5% (with 4% engine governing) Voltage Build-up Residual volts at AVR terminal > 5 VAC Voltage Output Max. 160 VDC @ 120 VAC External Voltage Adjustment ±10% @ 1 K Ohm 1 watt trimmer Auxiliary Winding 6~150 VAC (No load rms) Response Time 0.3~1 sec. @ ±20% voltage vibration LAM Voltage Droop Rate 10% & 15% selectable Environment Operating Temperature : -40~60 °C

Storage Temperature : -40~85 °C

Relative Humidity : Maximum 95%

Vibration : 1.5G @ 5~30 Hz / 5.0G @ 30~500 Hz AVR Controls Functions VOLT : Voltage Adjustment

STAB : Stability Adjustment

V/HZ : UFRO Knee Point Set

EXC.MAX : Excitation Current Limit

STAT : Droop Adjustment Dimensions 203.0 (L) x 153.0 (W) x 60.5 (H) mm

The post MTS SS448 Voltage Regulator Replacement Leroy Somer Olympian FG Wilson appeared first on Power Systems Plus.

Frequency 50/60 Hz , jumper selectable Output Voltage Max. 37 VDC @ 110 VAC input , Max. 73 VDC @ 220 VAC input

Current Continuous 3.5A, Intermittent 7A for 10 sec.

Resistance Min. 15 Ohm Max. 100 Ohm Voltage Regulator Rate < ±1% (with 4% engine governing) Voltage Build-up Residual voltage at AVR terminal > 5 VAC External Voltage Adjustment ±5% @ 1 K Ohm 1 watt   /   ±10% @ 2 K Ohm 1 watt Unit Power Dissipation Max. 8 watt EMI Suppression Internal electromagnetic interference filtering Under Frequency Protection

(Factory Setting) 60 Hz system – knee point at 54 ~ 61 Hz

50 Hz system – knee point at 45 ~ 51 Hz Environment Operating Temperature : -40~60 °C

Storage Temperature : -65~85°C

Relative Humidity : Maximum 95%

Mechanical Vibration : 1.3G @ 5~26 Hz / 5.0G @ 52~1000 Hz AVR Controls Functions VOLT Voltage : Adjustment

STAB : Stability Adjustment

U/F*: To Set the U/F Knee Point

(*U/F: Under Frequency Protection) Dimensions 99.5 (L) x 67.0 (W) x 47.5 (H) mm

The post McPherson Controls MTS SS350 Voltage Regulator | Direct Replacement Marathon SE350 appeared first on Power Systems Plus.

Frequency 50/60 Hz selectable Output Voltage Max. 170 VDC @ 240 VAC input

Current Continuous 5A, Intermittent 7A for 10 sec.

Resistance Min. 15 Ohm Max. 100 Ohm Voltage Regulation < ±1% (with 4% engine governing) Voltage Build-up Residual voltage at AVR terminal > 5 VAC External Volts Adjustment ±10% with 5 K Ohm 1 watt trimmer Unit Power Dissipation Max. 8 watt Soft Start Ramp Time 2 sec. Thermal Drift 0.03% per °C change in AVR ambient Under Frequency Protection For 60 Hz -knee point set at 55 Hz

For 50 Hz- knee point set at 45 Hz Environment Operating Temperature : -40~65 °C

Storage Temperature : -40~80 °C

Relative Humidity : Maximum 95%

Vibration : 3.3G @ 100~2 KHz AVR Controls Function VOLTS : Voltage Adjustment

STAB : Stability Adjustment

U/F*: To Set the U/F Knee Point

(*U/F: Under Frequency Protection) Dimensions 150.0 (L) x 100.0 (W) x 74.0 (H) mm Weight 421 g ±2%

The post MTS SS12-N Self Excited Automatic Voltage Regulator | Onan VR21 Caterpillar VR6 Yanmar EDY 5000T appeared first on Power Systems Plus.