Message us for availability before ordering!

The DSE9474 is an intelligent 30-amp 24-volt switch-mode battery charger that can be programmed for different charging curves. This helps to maximize battery life. The charger is programmed using the DSE Configuration Suite Software. The charger can be DIN rail or Chassis mounted and has three built-in LEDs to indicate current charging status and fault conditions. The charger continues to operate during cranking and running and accepts multiple AC voltage connections.

Overall Size:
240 mm × 263 mm × 89 mm (9.4″ × 10.4″ × 3.5″)

Weight:
2.5 kg

Key Features & Benefits

• Intelligent three- and four-stage charging profiles for safe, complete charging of multiple battery types

• 12V and 24V configurable design for maximum flexibility and cost efficiency

• Adjustable output current to suit different battery sizes and prevent overcharging

• Manual and automatic boost modes for faster charging and charge maintenance

• Digital microprocessor control for accurate, reliable charging and monitoring

• Low output ripple and excellent line regulation for sealed and vented batteries

• Customisable charging curves for non-standard battery chemistries

• Full electronic protection including AC under/over voltage, DC overcurrent, overvoltage, and undervoltage

• Automatic battery detection and self-test diagnostics for early fault warning

• Short circuit and reverse polarity protection with automatic recovery

• Automatic power de-rating at high ambient temperatures

• Optional PT1000 battery temperature sensor for precise temperature compensation

• Cell charge boost and equalisation to improve battery life and performance

• MODBUS RTU (RS485) communication for remote monitoring and integration

• Configurable via DSE Configuration Suite PC software

• Optional remote display (DSE2541) for off-panel monitoring

• High efficiency operation for low running costs and cool performance

AC Supply

Voltage Range:
90 V to 305 V AC (L–N)

Frequency Range:
48 Hz to 64 Hz

DC Output

Model: DSE9474
Output: 30 A DC @ 24 V DC

Ripple & Noise:
1%

Efficiency:>90%

Line Regulation:
<0.5%

Load Regulation:
1%

Temperature Sensor Input

PT1000

Protections

• Short circuit

• DC under and over voltage

• DC over current

• Reverse polarity

• Over temperature

• AC under and over voltage

Charge Failure Relay

3 A @ 30 V DC, volt-free relay

Keep your batteries fully charged and protected with the DSE9474 intelligent battery charger. Order yours today from Power Systems Plus in Oregon!

The post DSE9474 Intelligent Battery Charger | 24 Volt 30 Amp appeared first on Power Systems Plus.