DSE 020-1053 4G Antenna For Sale

Optimize your DSE890 MKII controller’s connectivity with this high-performance Combined 4G LTE (Main & Diversity) / GPS Antenna. Engineered specifically for seamless integration, this antenna enables reliable GPS location tracking and robust 4G LTE internet access. The enhanced internet connection supports communication with the DSEWebNet® server and MQTT broker, giving you real-time monitoring and control capabilities.

Key Features:

• Dual 4G LTE antennas (Main & Diversity) for superior signal strength and network reliability

• Built-in GPS antenna for accurate location detection

• Compact design with a 60 mm diameter and 69 mm housing depth

• Lightweight at just 300 grams, easy to install and handle

• Compatible exclusively with the DSE890 MKII controller

Product Variant:

• Model 020-1053 – Combined 4G LTE (Main & Diversity) / GPS Antenna

Upgrade your generator control system with this essential antenna to ensure uninterrupted connectivity and precise GPS tracking, critical for remote management and diagnostics.

The post DSE Combined 4G LTE (Main & Diversity) / GPS Antenna appeared first on Power Systems Plus.

24 Volt, 15 Amp

The post DSE BC2415i Intelligent Battery Charger | 24 Volt 15 Amp appeared first on Power Systems Plus.

The DSEA109 Digital Automatic Voltage Regulator (AVR) with CAN is designed to regulate the output voltage of an AC alternator. The DSEA109 is supplied by either a 3 phase PMG, single phase PMG, stator auxiliary winding or a shunt system taking power from the output windings.

The DSEA109 eliminates the complexities involved with analogue AVR designs. Analogue AVR designs can be over sensitive to changes in temperature which affects stability whereas the DSEA109 AVR maintains a smooth, stable regulated AC output voltage, regardless of the electrical load connected.The DSEA109 also features 3-phase sensing for better regulation.

Order your DSE A109 AVR today from Power Systems Plus in Oregon!

Please Note: The DSE815 interface is required for programming.

OVERALL SIZE
180 mm x 145 mm x 61 mm (7.0” x 5.7” x 2.4”)
WEIGHT
0.46 kg
PRODUCT VARIANTS
A109-01 – A109 Digital AVR With CAN Communications & PMG

The post DSEA109 Digital Automatic Voltage Regulator (AVR) with CAN Communications & PMG appeared first on Power Systems Plus.

The DSE6120 MKIII is an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications.

Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC.

The module is compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offers an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements.

Message us for availability!

The post Message us for Availability! DSE6120 MKIII AMF Control Module appeared first on Power Systems Plus.

The DSE6110 MKII is an Auto Start Control Module suitable for a wide variety of single, diesel or gas, genset applications.

Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs and remote PC.

The module includes USB connection and dedicated DSENet® terminals for system expansion.

The module is compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offers an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements.

The post 4-6 week lead time! DSE6110 MKII Auto Start Control Module appeared first on Power Systems Plus.

DSE8620 MKII Synchronising Auto Mains (Utility) Failure Load Share Control Module

The DSE8620 MKII represents the latest in complex load sharing & synchronising control technology. Designed to synchronise a single genset with a mains (utility) supply, the DSE8620 MKII control module is packed with multiple features and benefits that are unrivalled across the generator control industry.

The controller also has the option to be configured for use as a DSE8610 MKII Auto Start Load Sharing & Synchronising Control Module. When converted for use as a DSE8610 MKII the unit provides generator to generator load share functionality.

KEY FEATURES
• Comprehensive synchronising &
loadsharing capabilities
• Built in governor and AVR control
• Base load (kW export) control
• Positive & negative kVAr export
control
• Mains (Utility) decoupling protection
• Mains (Utility) failure detection
• Mains (Utility) power (kW, kV Ar,
kV A & pf) monitoring
• Mains (Utility) de-coupling
protection
• Mains (Utility) kW export protection
• Peak lopping & shaving functionality
• 4-Line back-lit LCD text display
• Multiple Display Languages
• Five key menu navigation
• LCD alarm indication
• Heated display option available
• Customisable power-up text and
images
• DSENet® expansion compatibility
• Data logging & trending facility
• Internal PLC editor
• Protections disable feature
• Fully configurable via PC using
USB, RS232, RS485 & Ethernet
communication
• Front panel configuration with
PIN protection
• Power save mode
• 3 phase generator sensing and
protection
• Generator current and power
monitoring (kW, kvar, kVA, pf)
• kW and kvar overload alarms
• Reverse power alarms
• Over current protection
• Unbalanced load protection
• Independent earth fault protection
• Breaker control via fascia buttons
• Fuel and start outputs configurable
when using CAN
• 8 configurable DC outputs
• 2 configurable volt-free relay
outputs
• 4 configurable analogue/digital
inputs
• Built in sensors to support 0 V to 10
V & 4 mA to 20 mA
• 12 configurable digital inputs
• Configurable 5 stage dummy load
and load shedding outputs
• CAN, MPU and alternator frequency
speed sensing in one variant
• Real time clock
• Manual and automatic fuel pump
control
• Engine run-time scheduler
• Fuel usage monitor and low fuel
level alarms
• Simultaneous use of all
communication ports
• Remote SCADA monitoring via
various DSE software applications
• MODBUS RTU & TCP support with
configurable MODBUS pages for
integration into building
management systems (BMS)
• 3 configurable maintenance alarms
• Compatible with a wide range of
CAN engines, including tier 4
engine support
• Uses DSE Configuration Suite PC
Software for simplified configuration

KEY BENEFITS
• Can be configured for use as a
DSE8610 MKII
• 132 x 64 pixel ratio display for
clarity
• Real-time clock provides accurate
event logging
• Ethernet communication, provides
builit in advanced remote
monitoring.
• Can be integrated into building
management systems (BMS) and
programmable logic control (PLC)
• Increased input and output
expansion capability via DSENet®
• Licence-free PC software
• IP65 rating (with supplied gasket)
offers increased resistance to water
ingress
• Extended internal PLC editor
allows user configurable functions
to meet specific application
requirements.

SPECIFICATIONS
DC SUPPLY
CONTINUOUS VOLTAGE RATING
5 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing
supply was at least 10 V before dropout
and supply recovers to 5 V. This is
achieved without the need for internal
batteries.LEDs and backlight will not be
maintained during cranking.
MAXIMUM OPERATING CURRENT
530 mA at 12 V, 280 mA at 24 V
MAXIMUM STANDBY CURRENT
320 mA at 12 V, 160 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
GENERATOR & MAINS (UTILITY)
VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICKUP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)
INPUTS
DIGITAL INPUTS A TO L
Negative switching
ANALOGUE INPUTS A TO D
Configurable as:
Negative switching digital input
0 V to 10 V sensor
4 mA to 20 mA sensor
0 Ω to 480 Ω sensor
OUTPUTS
OUTPUT A & B (FUEL & START)
15 A DC at supply voltage
OUTPUTS C & D
8 A AC at 250 V AC (Volt-free)
AUXILIARY OUTPUTS E to L
2 A DC at supply voltage
BUILT IN AVR GOVERNOR CONTROL
MINIMUM LOAD IMPEDANCE
500 Ω
Fully isolated
GAIN VOLTAGE
0 V to 10 V DC
Fully isolated
OFFSET VOLTAGE
0 V to 10 V DC
Fully isolated
DIMENSIONS
OVERALL
245 mm x 184 mm x 51 mm
9.6” x 7.2” x 2.0”
PANEL CUT-OUT
220 mm x 160 mm
8.7” x 6.3”
MAXIMUM PANEL THICKNESS
8 mm
0.3”
STORAGE TEMPERATURE RANGE
-40 °C to +85 °C
-40 °F to +185 °F
OPERATING TEMPERATURE RANGE
-30 °C to +70 °C
-40 °F to +185 °F
HEATED DISPLAY VARIANT
-40 °C to +70 °C
-40 °F to +158 °F

The post DSE8620 MKII Synchronising AMF Load Share Control Module appeared first on Power Systems Plus.

The DSE331 ATS Module monitors voltage and frequency from two AC sources, automatically starting a generator or transferring the load during a utility failure, then returning to mains when power is stable. It provides reliable backup power for homes, businesses, and critical systems.

The post Deep Sea Electronics DSE331 Auto Transfer Switch Control Module appeared first on Power Systems Plus.

Deep Sea Electronics DSE334 Auto Transfer Switch Control Module

The post DSE334 Auto Transfer Switch Control Module appeared first on Power Systems Plus.

Deep Sea Electronics DSEE100 Engine Only Control Module DSEE 100 #E100-01

This item is currently in-stock!

The E100 engine only control module is engineered to offer versatile engine control coupled with integrated monitoring and protection features. With full configurability, it caters to a diverse array of applications such as engine-driven pumps and compressors, ensuring optimal performance and safety across various settings.

Order your DSE E100 engine only control module!

DC SUPPLY

CONTINUOUS VOTLAGE RATING

8 V to 35 V continuous

CRANKING DROPUTS

Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.

MAXIMUM OPERATING CURRENT

85 mA at 12 V, 96 mA at 24 V

MAXIMUM STANDBY CURRENT

51 mA at 12 V, 47 mA at 24 V

MAXIMUM SLEEP CURRENT

35 mA at 12 V, 32 mA at 24 V

CHARGE FAIL/EXCITATION RANGE

0 V to 35 V

INPUTS

DIGITAL INPUTS A to D

Negative switching

ANALOGUE INPUTS A to C

Configurable as:

Negative switching digital input

Resistive

OUTPUTS

DC OUTPUT A (FUEL) & B (START)

10 A short-term

5 A continuous at supply voltage

VOLT-FREE OUTPUTS C & D

2 A DC at supply voltage

AUXILIARY OUTPUTS C, D, E & F

2 A DC at supply voltage

PULSE PICK-UP

VOLTAGE RANGE

+/- 0.5 V to 70 V

FREQUENCY RANGE

5 Hz to 10,000 Hz

The post DSEE100 Engine Only Control Module DSEE 100 #E100-01 appeared first on Power Systems Plus.

Deep Sea Electronics DSE2157 DSENet® Output Expansion Module #2157-01

This product has a 2-4 week lead time. Order yours today for when you really need it!

Unlock enhanced control of your generator with the DSE2157 output relay expansion module from Deep Sea Electronics. Add 8 extra outputs effortlessly, with the option to connect up to 10 modules for extensive capability with the versatile DSE2157.  Don’t miss out on upgrading your generator to the DSE2157 output expansion module!

SPECIFICATIONS

The post DSE2157 DSENet® Output Expansion Module appeared first on Power Systems Plus.