Deep Sea Electronics DSE4520 MKII Auto Mains Utility Failure Control Module DSE 4520MKII #4520-05

Elevate your generator’s performance with the advanced features of the DSE4520 MKII Auto Mains Utility Failure Control Module.

Engineered to enhance reliability and streamline operations, this cutting-edge module ensures seamless power management during outages. Upgrade today to safeguard your operations and maintain uninterrupted productivity with the DSE4520 MKII control module for sale from Power Systems Plus!

The DSE4520 MKII is a compact Auto Mains (Utility) Failure Control Module that has been developed to provide an outstanding range of features within a compact enclosure.

THE MODULE CAN BE CONFIGURED FOR USE AS AN AUTO START CONTROL MODULE. 

SPECIFICATION

DC SUPPLY

CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous

CRANKING DROPOUTS

Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT

85 mA at 12 V, 96 mA at 24 V

MAXIMUM STANDBY CURRENT

51 mA at 12 V, 47 mA at 24 V

MAXIMUM SLEEP CURRENT

35 mA at 12 V, 32 mA at 24 V

MAXIMUM DEEP SLEEP CURRENT

<10 uA at 12 V, <10 uA at 24 V

OUTPUTS

OUTPUT A (FUEL)

10 A short term, 5 A continuous,

at supply voltage

OUTPUT B (START)

10 A short term, 5 A continuous,

at supply voltage

AUXILIARY OUTPUTs C & D

2 A DC at supply voltage

GENERATOR

VOLTAGE RANGE

15 V to 415 V AC (Ph to N)

26 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE

3.5 Hz to 75 Hz

The post 4–6-week Lead Time! DSE4520 MKII Auto Mains Utility Failure Control Module appeared first on Power Systems Plus.

The DSE7420 is a sophisticated mono display auto mains (utility) control module packed with industry leading features to enhance single-set control. The module can be used across a wide range of diesel and gas gen-set applications.

OVERALL SIZE

240 mm x 181 mm x 42 mm (9.4” x 6.8” x 1.6”)

PANEL CUTOUT SIZE

220 mm x 160 mm (8.7″ x 6.3″)

MAXIMUM PANEL THICKNESS

8.0 mm (0.3”)

WEIGHT

0.88kg

Key Features and Benefits:

• CAN and magnetic pick-up sensing.
• Makes the module ideal for standard and electronic engine applications.
• Configurable inputs/outputs (11/8).
• Provides multiple installation options.
• Fuel usage monitor and low level alarms.
• Tracks the amount of fuel being used and sounds an alarm if over/under fuel use is detected.
• Remote communications (RS232, RS485, Ethernet, Modbus, RTU/TCP).
• Provides secure and simple off site monitoring. All ports are continuously active.
• Configurable event log (250).
• Provides access to historical alarms and operational status.
• Integral PLC editor.
• Ensures additional applications are easily integrated into the system.
• Power monitoring (kW h, kVAr, kv Ah, kV Ar h), reverse power protection, kW overload protection.
• Provides clear accurate power measurement information.
• Load switching, load shedding & dummy load outputs.
• Allows load options and dummy load requirements to be independently controlled.
• Data logging (HDD/USB).
• Provides current and historical status information.
• DSE Configuration Suite PC Software.
• Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
• Tier 4 CAN engine support.
• Ensures the control module can be used with the latest in modern electronic engine technology.

SPECIFICATION

DC SUPPLY

CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous

CRANKING DROPOUTS

Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries

MAXIMUM OPERATING CURRENT

260 mA at 12 V, 130 mA at 24 V

MAXIMUM STANDBY CURRENT

120 mA at 12 V, 65 mA at 24 V

CHARGE FAIL/EXCITATION RANGE

0 V to 35 V

OUTPUTS

OUTPUT A (FUEL)

15 A DC at supply voltage

OUTPUT B (START)

15 A DC at supply voltage

OUTPUTS C & D

8 A AC at 250 V AC (Volt free)

AUXILIARY OUTPUTS E,F,G,H,I & J

2 A DC at supply voltage

GENERATOR

VOLTAGE RANGE

15 V to 333 V AC (L-N)

FREQUENCY RANGE

3.5 Hz to 75 Hz

MAINS (UTILITY)

VOLTAGE RANGE

15 V to 333 V AC (L-N)

FREQUENCY RANGE

3.5 Hz to 75 Hz

MAGNETIC PICK UP

VOLTAGE RANGE

+/- 0.5 V to 70 V

FREQUENCY RANGE

10,000 Hz (max)

The post Email us for availability before ordering! DSE7420 Auto Mains Utility Failure Control Module DSE 7420 #7420-03 appeared first on Power Systems Plus.

The Deep Sea Electronics DSE4620 Auto Start Control Module is a compact Auto Mains (Utility) Failure control module designed to automatically start and stop standby generators during a utility power outage. The controller provides advanced engine monitoring, generator protection, and power measurement in a compact panel-mounted enclosure.

Key Features

• Back-lit icon LCD display for clear generator status and alarms
• 3-phase generator and mains sensing for accurate power monitoring
• Generator and load power monitoring (kW, kVA, kVAr, power factor)
• Generator overload protection to safeguard engine performance
• Magnetic pick-up speed sensing for precise engine monitoring
• Configurable inputs and outputs for flexible installation
• Battery voltage monitoring and engine protection features
• Event log storing up to 50 alarms and operational events
• Compatible with DSE Configuration Suite PC software for easy setup

Dimensions

Overall Size
140 mm × 113 mm × 43 mm
(5.5″ × 4.4″ × 1.5″)

Panel Cutout Size
118 mm × 92 mm
(4.6″ × 3.6″)

Maximum Panel Thickness
8.0 mm (0.3″)

Weight
0.28 kg

Electrical Specifications

DC Supply

Continuous Voltage Rating
8 V to 35 V

Cranking Dropouts
Able to survive 0 V for 50 mS provided supply was at least 10 V before dropout and recovers to 5 V.

Maximum Operating Current
85 mA at 12 V
96 mA at 24 V

Maximum Standby Current
51 mA at 12 V
47 mA at 24 V

Maximum Sleep Current
35 mA at 12 V
32 mA at 24 V

Maximum Deep Sleep Current
<10 uA

Mains (Utility)

Voltage Range
15 V to 415 V AC (Ph-N)
26 V to 719 V AC (Ph-Ph)

Frequency Range
3.5 Hz to 75 Hz

Generator Sensing

Voltage Range
15 V to 415 V AC (Ph-N)
26 V to 719 V AC (Ph-Ph)

Frequency Range
3.5 Hz to 75 Hz

Outputs

Fuel Output (A)
10 A short term, 5 A continuous

Start Output (B)
10 A short term, 5 A continuous

Auxiliary Outputs (C–F)
2 A DC at supply voltage

Magnetic Pick-Up

Voltage Range
±0.5 V to 70 V

Maximum Frequency
10,000 Hz

Availability

Order the DSE4620 Auto Mains Failure Control Module online or message us to confirm availability and current lead time.

The post DSE4620 Auto Mains (Utility) Failure Control Module appeared first on Power Systems Plus.

The DSE4610 is a compact Auto Start Control Module that has been developed to provide an outstanding range of features within a compact enclosure.

OVERALL SIZE

140 mm x 113 mm x 43 mm (5.5” x 4.4” x 1.5”)

PANEL CUTOUT SIZE

118 mm x 92 mm (4.6″ x 3.6″)

MAXIMUM PANEL THICKNESS

8.0 mm (0.3”)

WEIGHT

0.28kg

KEY Features and Benefits

• Large back-lit icon LCD display.
• Displays information to the operator in a clear and concise format.
• 3-phase generator sensing.
• Provides true generator sensing.
• 600 V ph-ph nominal system compatibility.
• Provides global flexibility.
• Generator & load power monitoring (kW, kV A, kV Ar, pf).
• Provides clear accurate power measurement information.
• Generator overload protection (kW).
• Provides engine overload protection.
• Configurable inputs & outputs.
• Provides multiple installation options.
• Configurable DC, volt-free and staged loading outputs.
• Provides multiple installation options.
• Fuel & crank outputs.
• Provides controlled engine starting and stopping.
• Magnetic pick-up speed sensing.
• Provides full monitoring flexibility.
• Engine speed protection, engine hours counter, engine pre-heat, engine run-time scheduler, engine idle control for start/stop.
• Ensures the engine is fully monitored for improved operating performance.
• Battery voltage monitoring.
• Ensures the battery maintains enough power at all times.
• Configurable event log (50).
• Provides access to historical alarms and operational status.
• DSE Configuration Suite PC Software.
• Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.

SPECIFICATION

DC SUPPLY

CONTINUOUS VOLTAGE RATING

8 V to 35 V Continuous

CRANKING DROPOUTS

Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT

85 mA at 12 V, 96 mA at 24 V

MAXIMUM STANDBY CURRENT

51 mA at 12 V, 47 mA at 24 V

MAXIMUM SLEEP CURRENT

35 mA at 12 V, 32 mA at 24 V

MAXIMUM DEEP SLEEP CURRENT

<10 uA at 12 V, <10 uA at 24 V

OUTPUTS

OUTPUT A (FUEL)

10 A short term, 5 A continuous,

at supply voltage

OUTPUT B (START)

10 A short term, 5 A continuous,

at supply voltage

AUXILIARY OUTPUTs C & D

2 A DC at supply voltage ­

GENERATOR

VOLTAGE RANGE

15 V to 415 V AC (Ph-N)

26  to 719 V AC (Ph – Ph)

FREQUENCY RANGE

3.5 Hz to 75 Hz

MAGNETIC PICK-UP

VOLTAGE RANGE

+/- 0.5 V to 70 V

FREQUENCY RANGE

10,000 Hz (max)

The post DSE4610 Auto Start Control Module RTC DSE 4610 #4610-03 appeared first on Power Systems Plus.