ATS Archives - Power Systems Plus https://powersystemsplusinc.com/product-tag/ats/ Generator Service, Sales, Parts, & Installation- Since 1999 Wed, 13 May 2026 22:56:39 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://powersystemsplusinc.com/wp-content/uploads/2018/01/logofixed2-50x50.png ATS Archives - Power Systems Plus https://powersystemsplusinc.com/product-tag/ats/ 32 32 Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 277/480 1000A NEMA 3R https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-277-480-1000a-nema-3r/ Sat, 06 Mar 2021 00:33:22 +0000 https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-277-480-1000a-nema-3r/ ASCO Automatic Transfer Switch Manufactured by Schneider Electric.
With an ATS, you are protected 24 hours a day, seven days a week.
When the utility power fails, the ATS automatically starts the generator set and
transfers the load once the generator has reached proper voltage and
frequency. This happens in a matter of seconds after the power failure occurs.
As soon as the utility power has been restored, the ATS will automatically switch the load
back and, after a time delay, shut down the engine generator.
UL 1008
Listed to UL 1008 standard for total system loads for automatic transfer switches.
Meets NFPA 110
Meets NFPA 110 for Emergency and Standby Power Systems and the
National Electrical Code Articles 700, 701 and 702.
True Double-Throw Operation
The inherently inter-locked, single solenoid design prevents connections to both
sources at the same time.
Series 300 Group G Controller
Easy-to-navigate 128×64  LCD display with keypad provides LED indicators for switch
position, source availability, not in auto mode, and alert condition.
The controller also includes test and time delay bypass soft keys.
Withstand and Close-On Rating
Maximum of 22kA when used with circuit breakers.
Designed to Fit Anywhere
The ASCO Automatic Transfer Switch, 300 series line represents the most compact design
of automatic power transfer switches in the industry. With space in electrical closets being
at a premium, the use of wall or floor mounted ASCO Transfer Switches assure designers
optimum utilization of space. All transfer switches through 2000 amperes are designed to
be completely front accessible; permitting the enclosures to be installed flush against the
wall while allowing installation of all power cabling and connections from the front of the
switch. Additionally, cable entrance plates are also standard on the 1600 and 2000 amperes
units to install optional side-mounted pull boxes for additional cable bending space.

The post Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 277/480 1000A NEMA 3R appeared first on Power Systems Plus.

]]> Amperage 1000 Amps Voltage Output 115-600V Frame H Current Limiting Fuses 480/600V Max. 200kA Dimensions (WxHxD) NEMA 1: 34″ x 72″ x 20″
NEMA 3R/4/12: 34″ x 72″ x 20″

 

The post Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 277/480 1000A NEMA 3R appeared first on Power Systems Plus.

]]> ASCO 300 1000 Amp Automatic Transfer Switch | NON-SERVICE ENTRANCE RATED | 2 Wire Start, 4 POLE, 3-PH, 346/600, 1000A, NEMA 3R https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-346-600-1000a-nema-3r/ Sat, 06 Mar 2021 00:33:22 +0000 https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-346-600-1000a-nema-3r/ Ensure your business stays powered with the ASCO 300 1000 Amp Automatic Transfer Switch. This heavy-duty ATS is designed for 115-600V output with H-frame construction and 480/600V current limiting fuses up to 200kA, providing reliable automatic power transfer during utility outages.

Key Features:

  • Massive 1000 Amp Capacity: Handles large loads safely and efficiently.

  • UL 1008 and NFPA 110 Certified: Meets top safety and emergency power standards.

  • Flexible Enclosures: NEMA 1 and NEMA 3R, 4, 12 with 34 by 72 by 20 inch dimensions for easy installation.

  • Dependable Operation: True double-throw design ensures safe transfer between utility and generator power.

Call us today for an ASCO 300 1000 Amp ATS installation or upgrade in Portland, Beaverton, and Salem, Oregon, or request a quote today to secure reliable backup power

The post ASCO 300 1000 Amp Automatic Transfer Switch | NON-SERVICE ENTRANCE RATED | 2 Wire Start, 4 POLE, 3-PH, 346/600, 1000A, NEMA 3R appeared first on Power Systems Plus.

]]> ASCO 300 1000 Amp Automatic Transfer Switch Installation in Portland, Beaverton, & Salem, Oregon

Ensure reliable backup power with the ASCO 300 1000 Amp Automatic Transfer Switch. Designed for 115-600V output with H-frame construction and 480/600V current limiting fuses up to 200kA, this ATS provides dependable automatic power transfer when utility power fails. Available in NEMA 1 and NEMA 3R, 4, 12 enclosures with dimensions 34 by 72 by 20 inches. We provide professional installation in Portland, Beaverton, and Salem, Oregon. Request a quote today to keep your home or business powered at all times.

 

Amperage 1000 Amps
Voltage Output 115-600V
Frame H
Current Limiting Fuses 480/600V Max. 200kA
Dimensions (WxHxD) NEMA 1: 34″ x 72″ x 20″
NEMA 3R/4/12: 34″ x 72″ x 20″

 

The post ASCO 300 1000 Amp Automatic Transfer Switch | NON-SERVICE ENTRANCE RATED | 2 Wire Start, 4 POLE, 3-PH, 346/600, 1000A, NEMA 3R appeared first on Power Systems Plus.

]]> ASCO 300 800A Automatic Transfer Switch | Non-SE, 2 Wire Start, 4 POLE, 3-PH 277/480, 800A, NEMA 3R https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-277-480-800a-nema-3r/ Sat, 06 Mar 2021 00:33:22 +0000 https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-277-480-800a-nema-3r/ Keep your Oregon property or business powered during outages with the ASCO 300 Series 800 Amp Non-Service Entrance Automatic Transfer Switch. This high-capacity ATS provides safe, reliable, and seamless generator power transfer, making it ideal for large commercial buildings, industrial facilities, or critical operations.

Key Features:

  • 800 Amp Capacity: Perfect for large commercial or industrial applications.

  • UL 1008 and NFPA 110 Certified: Meets top safety and emergency power standards.

  • NEMA 3R Enclosure: Outdoor-rated, protects against rain, dust, and accidental contact.

  • Dependable Operation: True double-throw design ensures safe transfer between utility and generator.

Need a new ATS or an upgrade? Call Power Systems Plus today in Portland, Salem, Beaverton, or Tigard, Oregon, to schedule your ASCO 300 800 Amp ATS installation or request a quote to secure reliable backup power.

The post ASCO 300 800A Automatic Transfer Switch | Non-SE, 2 Wire Start, 4 POLE, 3-PH 277/480, 800A, NEMA 3R appeared first on Power Systems Plus.

]]> ASCO 300 800A Automatic Transfer Switch Sale and Installation in Portland, Beaverton, & Tigard, Oregon

The ASCO 300 Series 800 Amp automatic transfer switch is ideal for large commercial and industrial applications, providing safe, seamless backup power. Non-service entrance rated for cost-effective installation, housed in a durable NEMA 3R enclosure for outdoor use and protection against rain, dust, and accidental contact. Need a new ATS? Call Power Systems Plus today at (503) 357-3839 for professional installation in Portland, Salem, Beaverton, or Tigard, Oregon.

 

Amperage 800 Amps
Voltage Output 115-600V
Frame H
Current Limiting Fuses 480/600V Max. 200kA
Dimensions (WxHxD) NEMA 1: 34″ x 72″ x 20″
NEMA 3R/4/12: 34″ x 72″ x 20″

 

The post ASCO 300 800A Automatic Transfer Switch | Non-SE, 2 Wire Start, 4 POLE, 3-PH 277/480, 800A, NEMA 3R appeared first on Power Systems Plus.

]]> Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 346/600 800A NEMA 3R https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-346-600-800a-nema-3r/ Sat, 06 Mar 2021 00:33:22 +0000 https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-346-600-800a-nema-3r/ ASCO Automatic Transfer Switch Manufactured by Schneider Electric.
With an ATS, you are protected 24 hours a day, seven days a week.
When the utility power fails, the ATS automatically starts the generator set and
transfers the load once the generator has reached proper voltage and
frequency. This happens in a matter of seconds after the power failure occurs.
As soon as the utility power has been restored, the ATS will automatically switch the load
back and, after a time delay, shut down the engine generator.
UL 1008
Listed to UL 1008 standard for total system loads for automatic transfer switches.
Meets NFPA 110
Meets NFPA 110 for Emergency and Standby Power Systems and the
National Electrical Code Articles 700, 701 and 702.
True Double-Throw Operation
The inherently inter-locked, single solenoid design prevents connections to both
sources at the same time.
Series 300 Group G Controller
Easy-to-navigate 128×64  LCD display with keypad provides LED indicators for switch
position, source availability, not in auto mode, and alert condition.
The controller also includes test and time delay bypass soft keys.
Withstand and Close-On Rating
Maximum of 22kA when used with circuit breakers.
Designed to Fit Anywhere
The ASCO Automatic Transfer Switch, 300 series line represents the most compact design
of automatic power transfer switches in the industry. With space in electrical closets being
at a premium, the use of wall or floor mounted ASCO Transfer Switches assure designers
optimum utilization of space. All transfer switches through 2000 amperes are designed to
be completely front accessible; permitting the enclosures to be installed flush against the
wall while allowing installation of all power cabling and connections from the front of the
switch. Additionally, cable entrance plates are also standard on the 1600 and 2000 amperes
units to install optional side-mounted pull boxes for additional cable bending space.

The post Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 346/600 800A NEMA 3R appeared first on Power Systems Plus.

]]> Amperage 800 Amps Voltage Output 115-600V Frame H Current Limiting Fuses 480/600V Max. 200kA Dimensions (WxHxD) NEMA 1: 34″ x 72″ x 20″
NEMA 3R/4/12: 34″ x 72″ x 20″

 

The post Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 346/600 800A NEMA 3R appeared first on Power Systems Plus.

]]> Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 120/208 1000A NEMA 3R https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-120-208-1000a-nema-3r/ Sat, 06 Mar 2021 00:33:22 +0000 https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-120-208-1000a-nema-3r/ ASCO Automatic Transfer Switch Manufactured by Schneider Electric.
With an ATS, you are protected 24 hours a day, seven days a week.
When the utility power fails, the ATS automatically starts the generator set and
transfers the load once the generator has reached proper voltage and
frequency. This happens in a matter of seconds after the power failure occurs.
As soon as the utility power has been restored, the ATS will automatically switch the load
back and, after a time delay, shut down the engine generator.
UL 1008
Listed to UL 1008 standard for total system loads for automatic transfer switches.
Meets NFPA 110
Meets NFPA 110 for Emergency and Standby Power Systems and the
National Electrical Code Articles 700, 701 and 702.
True Double-Throw Operation
The inherently inter-locked, single solenoid design prevents connections to both
sources at the same time.
Series 300 Group G Controller
Easy-to-navigate 128×64  LCD display with keypad provides LED indicators for switch
position, source availability, not in auto mode, and alert condition.
The controller also includes test and time delay bypass soft keys.
Withstand and Close-On Rating
Maximum of 22kA when used with circuit breakers.
Designed to Fit Anywhere
The ASCO Automatic Transfer Switch, 300 series line represents the most compact design
of automatic power transfer switches in the industry. With space in electrical closets being
at a premium, the use of wall or floor mounted ASCO Transfer Switches assure designers
optimum utilization of space. All transfer switches through 2000 amperes are designed to
be completely front accessible; permitting the enclosures to be installed flush against the
wall while allowing installation of all power cabling and connections from the front of the
switch. Additionally, cable entrance plates are also standard on the 1600 and 2000 amperes
units to install optional side-mounted pull boxes for additional cable bending space.

The post Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 120/208 1000A NEMA 3R appeared first on Power Systems Plus.

]]> Amperage 1000 Amps Voltage Output 115-600V Frame H Current Limiting Fuses 480/600V Max. 200kA Dimensions (WxHxD) NEMA 1: 34″ x 72″ x 20″
NEMA 3R/4/12: 34″ x 72″ x 20″

 

The post Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 120/208 1000A NEMA 3R appeared first on Power Systems Plus.

]]> Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 120/240 1000A NEMA 3R https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-120-240-1000a-nema-3r/ Sat, 06 Mar 2021 00:33:22 +0000 https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-4-pole-3-ph-120-240-1000a-nema-3r/ ASCO Automatic Transfer Switch Manufactured by Schneider Electric.
With an ATS, you are protected 24 hours a day, seven days a week.
When the utility power fails, the ATS automatically starts the generator set and
transfers the load once the generator has reached proper voltage and
frequency. This happens in a matter of seconds after the power failure occurs.
As soon as the utility power has been restored, the ATS will automatically switch the load
back and, after a time delay, shut down the engine generator.
UL 1008
Listed to UL 1008 standard for total system loads for automatic transfer switches.
Meets NFPA 110
Meets NFPA 110 for Emergency and Standby Power Systems and the
National Electrical Code Articles 700, 701 and 702.
True Double-Throw Operation
The inherently inter-locked, single solenoid design prevents connections to both
sources at the same time.
Series 300 Group G Controller
Easy-to-navigate 128×64  LCD display with keypad provides LED indicators for switch
position, source availability, not in auto mode, and alert condition.
The controller also includes test and time delay bypass soft keys.
Withstand and Close-On Rating
Maximum of 22kA when used with circuit breakers.
Designed to Fit Anywhere
The ASCO Automatic Transfer Switch, 300 series line represents the most compact design
of automatic power transfer switches in the industry. With space in electrical closets being
at a premium, the use of wall or floor mounted ASCO Transfer Switches assure designers
optimum utilization of space. All transfer switches through 2000 amperes are designed to
be completely front accessible; permitting the enclosures to be installed flush against the
wall while allowing installation of all power cabling and connections from the front of the
switch. Additionally, cable entrance plates are also standard on the 1600 and 2000 amperes
units to install optional side-mounted pull boxes for additional cable bending space.

The post Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 120/240 1000A NEMA 3R appeared first on Power Systems Plus.

]]> Amperage 1000 Amps Voltage Output 115-600V Frame H Current Limiting Fuses 480/600V Max. 200kA Dimensions (WxHxD) NEMA 1: 34″ x 72″ x 20″
NEMA 3R/4/12: 34″ x 72″ x 20″

 

The post Email us for availability before ordering! ASCO 300 Series Automatic Transfer Switch NON-SERVICE ENTRANCE RATED 2 Wire Start 4 POLE 3-PH 120/240 1000A NEMA 3R appeared first on Power Systems Plus.

]]> Email us for availability! ASCO 300 Series Automatic Transfer Switch SERVICE ENTRANCE RATED 2 Wire Start 3 POLE 3-PH 346/600 100A NEMA 3R https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-service-entrance-rated-2-wire-start-3-pole-3-ph-346-600-100a-nema-3r/ Thu, 04 Mar 2021 23:11:52 +0000 https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-service-entrance-rated-2-wire-start-3-pole-3-ph-346-600-100a-nema-3r/ ASCO Automatic Transfer Switch Manufactured by Schneider Electric.
With an ATS, you are protected 24 hours a day, seven days a week.
When the utility power fails, the ATS automatically starts the generator set and
transfers the load once the generator has reached proper voltage and
frequency. This happens in a matter of seconds after the power failure occurs.
As soon as the utility power has been restored, the ATS will automatically switch the load
back and, after a time delay, shut down the engine generator.
UL 1008
Listed to UL 1008 standard for total system loads for automatic transfer switches.
Meets NFPA 110
Meets NFPA 110 for Emergency and Standby Power Systems and the
National Electrical Code Articles 700, 701 and 702.
True Double-Throw Operation
The inherently inter-locked, single solenoid design prevents connections to both
sources at the same time.
Series 300 Group G Controller
Easy-to-navigate 128×64  LCD display with keypad provides LED indicators for switch
position, source availability, not in auto mode, and alert condition.
The controller also includes test and time delay bypass soft keys.
Withstand and Close-On Rating
Maximum of 22kA when used with circuit breakers.
Designed to Fit Anywhere
The ASCO Automatic Transfer Switch, 300 series line represents the most compact design
of automatic power transfer switches in the industry. With space in electrical closets being
at a premium, the use of wall or floor mounted ASCO Transfer Switches assure designers
optimum utilization of space. All transfer switches through 2000 amperes are designed to
be completely front accessible; permitting the enclosures to be installed flush against the
wall while allowing installation of all power cabling and connections from the front of the
switch. Additionally, cable entrance plates are also standard on the 1600 and 2000 amperes
units to install optional side-mounted pull boxes for additional cable bending space.

The post Email us for availability! ASCO 300 Series Automatic Transfer Switch SERVICE ENTRANCE RATED 2 Wire Start 3 POLE 3-PH 346/600 100A NEMA 3R appeared first on Power Systems Plus.

]]> Amperage 1200 Amps Voltage Output 115-600V Frame H Current Limiting Fuses 480/600V Max. 200kA Dimensions (WxHxD) NEMA 1: 38″ x 87″ x 23″
NEMA 3R/4/12: 41″ x 95.5″ x 33.5″

 

The post Email us for availability! ASCO 300 Series Automatic Transfer Switch SERVICE ENTRANCE RATED 2 Wire Start 3 POLE 3-PH 346/600 100A NEMA 3R appeared first on Power Systems Plus.

]]> ASCO 300 Series Automatic Transfer Switch | 3-Pole 3-Phase 400A | Non-Service Entrance | 277/480V | NEMA 1 https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-3-pole-3-ph-277-480-400a-nema-1/ Thu, 04 Mar 2021 17:05:17 +0000 https://powersystemsplusinc.com/product/asco-300-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-3-pole-3-ph-277-480-400a-nema-1/ Keep your Oregon commercial or industrial property powered during outages with the ASCO 300 Series 400 Amp Non-Service Entrance Automatic Transfer Switch. This reliable ATS provides safe, seamless generator power transfer, making it ideal for medium to large commercial buildings or facilities with critical loads.

  • 400 Amp Capacity: Supports medium to large commercial electrical systems with dependable performance.
  • Non-Service Entrance Rated: A cost-effective solution for properties not requiring direct service entrance integration.
  • UL 1008 and NFPA 110 Certified: Meets top safety and emergency power standards.
  • True Double-Throw Operation: Prevents connection to both utility and generator at the same time for safe, reliable power transfer.
  • NEMA 1 Enclosure: Indoor-rated, protects against dust and accidental contact.

Need a new ATS or an upgrade? Call Power Systems Plus today in Portland or Salem, Oregon, to schedule your ASCO 300 400 Amp Non-Service Entrance ATS installation or request a quote to secure reliable backup power.

The post ASCO 300 Series Automatic Transfer Switch | 3-Pole 3-Phase 400A | Non-Service Entrance | 277/480V | NEMA 1 appeared first on Power Systems Plus.

]]> ASCO 300 Series 400A Automatic Transfer Switch for Sale in Portland, Oregon

The ASCO 300 Series 400 Amp automatic transfer switch is ideal for medium to large commercial and industrial applications, providing safe, seamless backup power. Non-service entrance rated for cost-effective installation, housed in a durable NEMA 1 enclosure for indoor use and protection against dust and accidental contact. Need a new ATS? Call Power Systems Plus today at (503) 357-3839 for professional installation in Portland or Salem, OR.

 

The post ASCO 300 Series Automatic Transfer Switch | 3-Pole 3-Phase 400A | Non-Service Entrance | 277/480V | NEMA 1 appeared first on Power Systems Plus.

]]> ASCO 185 Series Automatic Transfer Switch | NON-SERVICE ENTRANCE RATED | 2 Wire Start | 230A | NEMA 1 https://powersystemsplusinc.com/product/asco-185-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-230a-nema-1/ Tue, 23 Feb 2021 20:57:43 +0000 https://powersystemsplusinc.com/product/asco-185-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-230a-nema-1/ The ASCO 185 Series automatic transfer switch (ATS) are 2-wire control switches that are compatible with all 2-wire start systems from all manufacturers. The switch monitors incoming utility power. When the utility power fails it starts the generator and transfer the emergency load onto the generator. After the utility power is restored it will transfer the load back to the utility source, cool down the generator and then return to a standby mode. The ATS has an exercise circuit that tests the generator system every week. The automatic test feature can be set under load or under no load.

The post ASCO 185 Series Automatic Transfer Switch | NON-SERVICE ENTRANCE RATED | 2 Wire Start | 230A | NEMA 1 appeared first on Power Systems Plus.

]]> Amperage 230 Amps Voltage Output 115-480V Frame D Current Limiting Fuses 480V Max. 100kA Dimensions (WxHxD) NEMA 1: 18″ x 48″ x 13″
NEMA 3R, 4, 12: 18″ x 50.5″ x 14.33″

 

The post ASCO 185 Series Automatic Transfer Switch | NON-SERVICE ENTRANCE RATED | 2 Wire Start | 230A | NEMA 1 appeared first on Power Systems Plus.

]]> ASCO 185 Series Automatic Transfer Switch | NON-SERVICE ENTRANCE RATED | 2 Wire Start | 230A | NEMA 3R https://powersystemsplusinc.com/product/asco-185-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-230a-nema-3r/ Tue, 23 Feb 2021 20:57:43 +0000 https://powersystemsplusinc.com/product/asco-185-series-automatic-transfer-switch-non-service-entrance-rated-2-wire-start-230a-nema-3r/ The ASCO 185 Series automatic transfer switch (ATS) are 2-wire control switches that are compatible with all 2-wire start systems from all manufacturers. The switch monitors incoming utility power. When the utility power fails it starts the generator and transfer the emergency load onto the generator. After the utility power is restored it will transfer the load back to the utility source, cool down the generator and then return to a standby mode. The ATS has an exercise circuit that tests the generator system every week. The automatic test feature can be set under load or under no load.

The post ASCO 185 Series Automatic Transfer Switch | NON-SERVICE ENTRANCE RATED | 2 Wire Start | 230A | NEMA 3R appeared first on Power Systems Plus.

]]> Amperage 230 Amps Voltage Output 115-480V Frame D Current Limiting Fuses 480V Max. 100kA Dimensions (WxHxD) NEMA 1: 18″ x 48″ x 13″
NEMA 3R, 4, 12: 18″ x 50.5″ x 14.33″

 

The post ASCO 185 Series Automatic Transfer Switch | NON-SERVICE ENTRANCE RATED | 2 Wire Start | 230A | NEMA 3R appeared first on Power Systems Plus.

]]>