The Deep Sea Electronics DSE160 Self‑Seeking Power Supply ensures seamless, reliable DC power for your ATS controller by automatically sourcing from mains, generator, or battery as needed. Designed for use with DSE3xx control modules, the DSE160 offers robust protection and clear operational feedback in a compact package.

Key Features & Benefits:

• 12 V & 24 V Variants: Flexible options to match your system requirements.
• Automatic Supply Switching: Instantly switches to generator or battery power upon mains failure.
• LED Status Indicators: Three front‑panel LEDs keep you informed of operating status at a glance.
• Wide Input Voltage & Frequency: Operates on 90–305 V AC (L‑N) at 48–64 Hz for broad compatibility.
• Clean, Stable Output: 1 A DC at 12 V or 24 V with <1 % ripple and noise.
• Fast Response: Rise time <20 ms ensures uninterrupted power delivery.
• High Efficiency: Over 80 % efficient for economical, cool operation.
• Tight Regulation: Line regulation <0.1 % Vo; load regulation <5 % Vo for precise voltage stability.
• Comprehensive Protections: Short‑circuit, over‑current, and reverse‑polarity safeguards.
• Compact Design: Fits easily inside control panels without consuming excessive space.

Ensure uninterrupted power for your ATS system and enhance the reliability of your generator installations—choose the DSE160 Self‑Seeking Power Supply for robust, automatic power management. Order yours today!

The post DSE160 Self Seeking 12V or 24V Power Supply appeared first on Power Systems Plus.

The DSE9701 has been replaced by the DSE BC2405 battery charger.

VERTICAL MOUNT
50 mm x 129.6 mm x 138.5 mm 2.0” x 5.1” x 5.45”)
HORIZONTAL MOUNT
129.6 mm x 138.5 mm x 50 mm (5.1” x 5.45” x 2.0”)
WEIGHT
0.3kg
PRODUCT VARIANTS
BC2405-01 – 24 Volt 5 Amp Battery Charger

FEATURES
• Wide AC input voltage
• Manual boost adjustment
• Constant current
• Constant voltage
• Automatic float mode return
• Low output ripple to suit all
battery types
• Reverse polarity protection, short
circuit protection and current
limiting
• Auto recovery on fault condition
removal
• Battery charger thermal de-rate
facility
• Cell charge boost & equalizing
• Chargers switch to eco power
mode when batteries are fully
charged
• Multiple modules can be linked
together to increase current
output
• Battery voltage measurement

BENEFITS
• Small and compact size
• Suitable for a wide range of
battery types
• No moving parts for longer
battery charger life
• Switched mode design
• Charge fail output
• Minimum 80% operating
efficiency
• Flexible mounting options
• Position of serial label allows for
simple charger identification
when fitted inside a panel.
• Can be used as a power supply.

Specifications

AC SUPPLY
FREQUENCY RANGE
45 Hz to 65 Hz
VOLTAGE RANGE
90 V to 305 V (L-N)
DC OUTPUT
DSEBC1205 OUTPUT
5 A DC 12 V DC
DSEBC2405 OUTPUT
5 A DC 24 V DC
RIPPLE AND NOISE
<3% Vo
EFFICIENCY
>80%
REGULATION
LINE
<1%
LOAD
<4% Vo
PROTECTIONS
Short Circuit
Reverse Polarity

DIMENSIONS
Horizontal (W x H x D)
129.6 mm x 138.5mm x 50 mm
5.1” x 5.45” x 2.0”
Vertical DIN Mounted (W x H x D)
50 mm x 129.6 mm x 138.5mm
2.0” x 5.1” x 5.45”
Vertical Clip Mounted (W x H x D)
50 mm x 140.8 mm x 138.5mm
2.0” x 5.55” x 5.45”
WEIGHT
0.4 kg
OPERATING TEMPERATURE RANGE
-25 °C to +80 °C (with de-rating)
-13 °F to +176 °F
STORAGE TEMPERATURE RANGE
-40 ºC to +85 ºC
-40 °F to +185 °F

The post DSE BC2405 Battery Charger | 24V 5A appeared first on Power Systems Plus.

Message us for availability before ordering!

The DSE9474 is an intelligent 30-amp 24-volt switch-mode battery charger that can be programmed for different charging curves. This helps to maximize battery life. The charger is programmed using the DSE Configuration Suite Software. The charger can be DIN rail or Chassis mounted and has three built-in LEDs to indicate current charging status and fault conditions. The charger continues to operate during cranking and running and accepts multiple AC voltage connections.

Overall Size:
240 mm × 263 mm × 89 mm (9.4″ × 10.4″ × 3.5″)

Weight:
2.5 kg

Key Features & Benefits

• Intelligent three- and four-stage charging profiles for safe, complete charging of multiple battery types

• 12V and 24V configurable design for maximum flexibility and cost efficiency

• Adjustable output current to suit different battery sizes and prevent overcharging

• Manual and automatic boost modes for faster charging and charge maintenance

• Digital microprocessor control for accurate, reliable charging and monitoring

• Low output ripple and excellent line regulation for sealed and vented batteries

• Customisable charging curves for non-standard battery chemistries

• Full electronic protection including AC under/over voltage, DC overcurrent, overvoltage, and undervoltage

• Automatic battery detection and self-test diagnostics for early fault warning

• Short circuit and reverse polarity protection with automatic recovery

• Automatic power de-rating at high ambient temperatures

• Optional PT1000 battery temperature sensor for precise temperature compensation

• Cell charge boost and equalisation to improve battery life and performance

• MODBUS RTU (RS485) communication for remote monitoring and integration

• Configurable via DSE Configuration Suite PC software

• Optional remote display (DSE2541) for off-panel monitoring

• High efficiency operation for low running costs and cool performance

AC Supply

Voltage Range:
90 V to 305 V AC (L–N)

Frequency Range:
48 Hz to 64 Hz

DC Output

Model: DSE9474
Output: 30 A DC @ 24 V DC

Ripple & Noise:
1%

Efficiency:>90%

Line Regulation:
<0.5%

Load Regulation:
1%

Temperature Sensor Input

PT1000

Protections

• Short circuit

• DC under and over voltage

• DC over current

• Reverse polarity

• Over temperature

• AC under and over voltage

Charge Failure Relay

3 A @ 30 V DC, volt-free relay

Keep your batteries fully charged and protected with the DSE9474 intelligent battery charger. Order yours today from Power Systems Plus in Oregon!

The post DSE9474 Intelligent Battery Charger | 24 Volt 30 Amp appeared first on Power Systems Plus.